SUK · Third Year B.Tech. Civil Engineering · NEP 2020
Geotechnical Engineering
CE0252 · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60
Unit 1: Soil Properties and Classification
7 hoursOrigin of soil and the soil phase system; weight-volume relationships and index properties; particle size distribution by sieve and sedimentation; Atterberg limits, consistency indices and activity; soil structure; IS classification and the plasticity chart.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Soil formation, structure and clay minerals
- Three-phase system and weight–volume relationships
- Index properties of soil
- Particle size analysis: sieve and sedimentation
- Soil classification systems
Unit 2: Soil Hydraulics: Permeability and Seepage
6 hoursWater in soil, Darcy's law and its validity, factors affecting permeability, constant- and variable-head tests, layered soils; total, pore and effective stress; seepage pressure and force, critical gradient, quicksand and piping; flow nets and seepage loss.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Darcy's law and permeability
- Permeability tests in the laboratory and field
- Permeability of stratified soils
- Effective stress principle
- Seepage pressure and quicksand
- Flow nets and seepage discharge
- Filter design and piping
Unit 3: Compaction and Consolidation
7 hoursStandard and modified Proctor tests, dry density-moisture relationship, zero-air-voids line, field compaction control and equipment; Terzaghi's consolidation theory, compression index and coefficients of compressibility and volume change; NC, OC and UC soils; the laboratory consolidation test.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Compaction and Proctor tests
- Field compaction and its control
- Terzaghi's one-dimensional consolidation
- Consolidation test
- Compressibility: e–p and e–log p curves
- Normally and over-consolidated clays
Unit 4: Shear Strength of Soil
7 hoursShear stress and strength, Mohr-Coulomb theory and failure envelopes, total and effective stress approaches, factors affecting shear strength; direct shear, UU, CU and CD triaxial, unconfined compression and vane shear tests.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Mohr–Coulomb failure theory
- Direct shear test
- Triaxial test and drainage conditions
- Unconfined compression and vane shear tests
Unit 5: Earth Pressure and Slope Stability
7 hoursEarth pressure at rest, active and passive; Rankine's theory with surcharge, tension cracks and critical height; Coulomb's wedge theory; infinite and finite slopes, Taylor's stability number, the Swedish slip circle, method of slices and friction circle; slope improvement and landslides.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Earth pressure at rest and plastic equilibrium
- Rankine's earth pressure theory
- Effect of surcharge and submergence on earth pressure
- Coulomb's wedge theory
- Stability of slopes
- Stability of infinite slopes
- Stability of finite slopes: slip circle method
Unit 6: Fundamentals of Foundation Engineering
6 hoursRequirements and selection of foundations; bearing capacity by analytical and field methods; shallow foundations (isolated, combined and raft) and settlement; pile foundations, pile capacity and under-reamed piles.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Terzaghi's bearing capacity theory
- IS code method of bearing capacity
- Plate load test
- Settlement of shallow foundations
- Static capacity of piles
- Under-reamed piles
Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.