SUK TY Civil syllabus

SUK · Third Year B.Tech. Civil Engineering · NEP 2020

Foundation Engineering

CE0264 · Programme Elective 02 · Semester VI · 3 credits · ISE 10 + mid-semester 30 + ESE 60

One of the Programme Elective 02 options.

  1. Unit 1: Shallow Foundations

    6 hours

    Types and minimum depth; bearing capacity by Terzaghi, the IS code and Skempton; proportioning isolated footings, immediate and consolidation settlement, footings on slopes; rectangular and trapezoidal combined footings; RCC design of isolated footings.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Terzaghi's bearing capacity theory
    • Meyerhof, Hansen, Vesic and IS methods
    • Immediate settlement
    • Proportioning of combined and strap footings
  2. Unit 2: Raft Foundations

    6 hours

    Need and types of rafts; bearing capacity and settlement; design guidelines and floating foundations; rigid and elastic-plate (IS) analysis; contact pressure.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Raft foundations
    • Flexible and rigid rafts to IS 2950
    • Floating foundations
  3. Unit 3: Pile Foundations

    6 hours

    Classification of piles; single-pile capacity by static and dynamic formulae and load tests; group action and efficiency formulae; negative skin friction and pile settlement; group capacity in clay; under-reamed piles.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Classification and installation of piles
    • Static capacity of piles
    • Dynamic pile formulae
    • Pile load tests
    • Pile groups and negative skin friction
    • Under-reamed piles
  4. Unit 4: Machine Foundations

    8 hours

    Types and dynamic design criteria; permissible and probable amplitudes; IS 2974 criteria for reciprocating and impact machines; vibration isolation and effects on soil.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Principles of machine foundation design
    • Codal provisions for machine foundations
    • Vibration isolation and screening
  5. Unit 5: Sheet Piles and Cofferdams

    6 hours

    Types and uses of sheet piles; cantilever sheet piles in cohesive and granular soils; anchored bulkheads by free- and fixed-earth support; types and construction of cofferdams.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Cantilever and anchored sheet piles
    • Cofferdams
  6. Unit 6: Foundations in Difficult Soils and Stabilisation

    6 hours

    Expansive and soft compressible soils; dewatering, shoring and underpinning; mechanical, cement, lime, bituminous and chemical stabilisation and grouting.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Foundations on expansive soils
    • Drainage and dewatering of soil
    • Underpinning and foundation grouting
    • Mechanical stabilisation
    • Lime, cement and fly ash stabilisation

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.