SUK TY Civil syllabus

SUK · Third Year B.Tech. Civil Engineering · NEP 2020

Environmental Engineering

CE0253 · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60

  1. Unit 1: Water Supply Planning and Water Quality

    8 hours

    Water supply schemes: data, components and layout; design period; water demand and population forecasting; water quality parameters and drinking water standards of BIS and WHO.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Water supply schemes and design period
    • Water demand and population forecasting
    • Water quality and IS 10500
  2. Unit 2: Water Treatment Processes

    6 hours

    Treatment principles and flow sheets; river, canal and reservoir intakes; aeration and the cascade aerator; coagulation and flocculation; sedimentation theory, design of settling tanks, tube and plate settlers.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Intake structures
    • Aeration
    • Coagulation and flocculation
    • Sedimentation and settling tanks
    • Tube settlers
  3. Unit 3: Filtration, Disinfection and Distribution

    6 hours

    Filtration mechanisms and head loss; slow sand, rapid sand and pressure filters; disinfection and break-point chlorination; softening and demineralisation; service reservoirs; distribution layouts, transmission mains, pipes, valves, hydrants and meters; water audit and DPRs.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Rapid sand filters
    • Slow sand and pressure filters
    • Disinfection and chlorination
    • Softening and desalination
    • Storage reservoir capacity
    • Water distribution systems
  4. Unit 4: Wastewater Collection and Primary Treatment

    8 hours

    Sources and characteristics of wastewater, flow variation and BOD; storm water; sewerage systems and sewer design and maintenance; screens, grit chambers, oil and grease traps and primary settling tanks.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Wastewater characteristics and standards
    • Quantity of sewage and storm water
    • Separate and combined sewerage systems
    • Design of sewers
    • Screens and grit chambers
    • Skimming tanks and flotation
    • Primary sedimentation tanks
  5. Unit 5: Secondary Treatment, Sludge and Stream Pollution

    6 hours

    The activated sludge process, its design and modifications; trickling filters; anaerobic sludge digestion; low-cost treatment; stream self-purification, the DO sag curve and Streeter-Phelps equation; disposal and CPCB/MPCB effluent standards.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Activated sludge process
    • Design of the activated sludge process
    • Trickling filters
    • Sludge thickening and conditioning
    • Oxidation ponds and sludge disposal
    • Self-purification of streams
  6. Unit 6: Solid Waste, Air and Noise Pollution and EIA

    6 hours

    Types, sources and functional elements of solid waste; composting, incineration, pyrolysis and sanitary landfill; air and noise pollution; environmental impact assessment and environmental health and safety.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Solid waste: sources, collection and processing
    • Composting, incineration and landfills
    • Pyrolysis, RDF and gasification
    • Air pollutants and their control
    • Noise pollution and its control
    • Environmental impact assessment

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.