SUK TY Civil syllabus

SUK · Third Year B.Tech. Civil Engineering · NEP 2020

Design of Concrete Structures-I

CE0261 · Semester VI · 3 credits · ISE 10 + mid-semester 30 + ESE 60

  1. Unit 1: Introduction to RCC

    8 hours

    Stress-strain behaviour of concrete and steel, design philosophies, limit states, characteristic strengths and loads, partial safety factors; analysis and design of singly reinforced rectangular sections.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Working stress and limit state methods
    • Characteristic loads, strengths and partial safety factors
    • Singly reinforced rectangular sections
  2. Unit 2: Limit State of Collapse: Flexure

    6 hours

    Doubly reinforced rectangular sections; singly reinforced T- and L-beams.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Doubly reinforced sections
    • Flanged sections
  3. Unit 3: Limit State of Collapse: Shear and Bond

    6 hours

    Shear failure and shear reinforcement and its design; bond, factors affecting bond resistance and development length (no numericals on bond).

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Design for shear
    • Bond, development length and torsion
  4. Unit 4: Slabs and Staircase

    8 hours

    One-way and two-way slabs with different edge conditions to IS 456, cantilever slabs; a simply supported dog-legged staircase.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • One-way slabs
    • Two-way slabs
    • Cantilever and continuous slabs
    • Dog-legged staircase
  5. Unit 5: Columns

    6 hours

    Axially loaded columns; introduction to uniaxially eccentric circular and rectangular columns and interaction diagrams.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Short columns under axial load
    • Columns with uniaxial and biaxial bending
  6. Unit 6: Footings

    6 hours

    Isolated rectangular column footings of constant depth under axial load and moment.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Isolated footings
    • Eccentrically loaded footings

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.