SUK TY Civil syllabus

SUK · Third Year B.Tech. Civil Engineering · NEP 2020

Design of Bridges

CE0265 · Programme Elective 03 · Semester VI · 3 credits · ISE 10 + mid-semester 30 + ESE 60

One of the Programme Elective 03 options.

  1. Unit 1: Introduction and Investigation

    6 hours

    History, classification and importance of bridges; substructure and superstructure; investigation for bridges.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Bridge types and components
    • Bridge site selection and hydraulic data
  2. Unit 2: IRC Specifications and Loads

    6 hours

    IRC bridge code, carriageway and clearances; dead, live, impact, wind, seismic, longitudinal, centrifugal, buoyancy, earth pressure, current and thermal forces.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Bridge loading standards
    • Impact factor
  3. Unit 3: Design of RC Deck Systems

    6 hours

    Design considerations for RCC and PSC bridges, aesthetics and relative costs; RC deck slabs by Pigeaud's theory; beam-and-slab and T-beam decks by Courbon's theory.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Pigeaud's method
    • Deck slab of T-beam bridges
    • Courbon's method
    • Design of longitudinal and cross girders
  4. Unit 4: Construction Techniques

    8 hours

    Footings, piles and caissons; reinforced-earth walls and abutments; cantilever erection of decks; repair, strengthening and rehabilitation.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Erection of bridge girders
    • Balanced cantilever bridges
    • Repair and rehabilitation of bridges
  5. Unit 5: Substructure Design

    6 hours

    Design of abutments, piers and approach slabs.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Bridge foundations, piers and abutments
    • Wing walls and their stability
  6. Unit 6: Bearings and Expansion Joints

    6 hours

    Types of bearings and the forces on them; design of unreinforced elastomeric bearings; expansion joints.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Functions and types of bearings
    • Elastomeric bearings

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.