SUK TY Civil syllabus

SUK · Third Year B.Tech. Civil Engineering · NEP 2020

Bridge and Tunnel Engineering

CE0254 · Programme Elective 01 · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60

One of the Programme Elective 01 options.

  1. Unit 1: IRC Codes for Road Bridges

    8 hours

    IRC:5, 6, 18, 27, 45 and 78, with emphasis on loads, clearances and design provisions.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • IRC loading standards
    • Bridge loading standards
  2. Unit 2: Bridge Components

    6 hours

    Superstructure, substructure, foundations, bearings and expansion joints, studied from drawings and models.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Bridge substructure
    • Bridge types and components
    • Bridge foundations, piers and abutments
  3. Unit 3: Bridge Construction, Maintenance, Bearings and Expansion Joints

    6 hours

    Construction methods and maintenance of bridges; types, functions and forces on bearings and expansion joints of highway bridges.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Bridge bearings
    • Erection of bridge girders
    • Repair and rehabilitation of bridges
  4. Unit 4: Tunnel Classification, History and Cross-Sections

    8 hours

    Tunnel development in India; classification by purpose, conveyance, geology, alignment, shape and size; standard highway and railway tunnel cross-sections.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Types of tunnels and their standard sections
    • Geology for tunnels
  5. Unit 5: Tunnelling Methods

    6 hours

    Soft-ground, hard-rock and shallow tunnelling; muck disposal; problems met and their remedies.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Tunnelling: methods, lining, drainage and ventilation
    • Soft-ground and hard-rock tunnelling methods
  6. Unit 6: Tunnel Supports, Ground Treatment and Safety

    6 hours

    Timbering, steel ribs and shotcrete; grouting and dewatering; lighting, ventilation, dust control and drainage; explosions, flooding and safety measures.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Tunnel supports, ground treatment and safety
    • Shotcrete and sprayed concrete

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.