SUK TY Civil syllabus

SUK · Third Year B.Tech. Civil Engineering · NEP 2020

Advanced Design of RC Structures

CE0264 · Programme Elective 02 · Semester VI · 3 credits · ISE 10 + mid-semester 30 + ESE 60

One of the Programme Elective 02 options.

  1. Unit 1: Flat Slabs

    6 hours

    Large-span concrete roofs; classification and behaviour of flat slabs; the direct design and equivalent frame methods with code provisions.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Flat slab types and proportioning
    • Direct design method
    • Design of interior and end panels
  2. Unit 2: Deep Beams

    6 hours

    Analysis of deep beams and their design to IS 456:2000.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Design of deep beams to IS 456
  3. Unit 3: Concrete Chimneys

    6 hours

    Stresses in concrete chimneys for uncracked and cracked sections; code provisions and design of a chimney.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Design of RC chimneys
  4. Unit 4: Overhead Water Tanks

    8 hours

    Rectangular and circular tanks with flat bottoms, spherical and conical roofs, staging; design to IS 3370:2009.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • IS code provisions for water tanks
    • Design of circular water tanks
    • Design of rectangular water tanks
    • Elevated tanks and staging
  5. Unit 5: Retaining Walls

    6 hours

    Analysis and design of cantilever and counterfort retaining walls with horizontal and inclined surcharge.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Types of retaining walls
    • Design of cantilever retaining walls
    • Design of counterfort retaining walls
  6. Unit 6: Yield Line Analysis of Slabs

    6 hours

    Virtual work and equilibrium methods; simply supported rectangular slabs with corners held down under uniform and concentrated loads; design of rectangular and circular slabs.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Yield line theory
    • Virtual work method
    • Yield line analysis of rectangular slabs
    • Yield line analysis of circular and triangular slabs

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.