SUK · Third Year B.Tech. Computer Science and Engineering (Artificial Intelligence and Machine Learning) · NEP 2020
Internet of Things
AIML3104 · Elective I · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60
One of the Elective I options.
Unit 1: Introduction to IoT
6 hoursFunctional characteristics and recent trends; the role of the cloud; societal benefits in health care, M2M, transport, living, cities and the smart grid.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- IoT, M2M and cyber-physical systems
- Fog versus cloud computing for IoT
- IIoT use cases
Unit 2: Communication Principles
5 hoursRFID, ZigBee and Bluetooth; IP and MAC addresses; the IEEE 802 family; I/O interfaces and software components.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- IoT access technologies: 802.15.4, 802.11ah and LoRaWAN
- IoT communication models and APIs
Unit 3: Sensing and Actuation
5 hoursSensor features, resolution and classes; types of sensors and actuators and their purpose in IoT.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Industrial sensors and actuators
Unit 4: IoT Application Development
6 hoursFrameworks for IoT applications; device integration, data acquisition and storage on the cloud or a local server; authentication and authorisation of devices.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- IoT system design methodology
- IIoT cloud platforms
- Authentication and public-key cryptography for IoT
Unit 5: Introduction to IIoT
7 hoursIoT versus IIoT; next-generation sensors and their calibration and validation; device placement and low-cost communication design; manufacturing, oil and gas, automotive and transport applications.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- IoT versus IIoT
- IIoT design considerations
- IIoT in manufacturing and maintenance
- AUTOSAR and automotive CPS
Unit 6: Internet of Robotic Things
7 hoursStationary and mobile robots; localisation, mapping, planning and control; cloud-enabled robotics; IIoT in robotics; architectures for the IoRT.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Internet of robotic things and cloud robotics
- Mobile robot localisation and its challenges
- Path planning and obstacle avoidance
Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.