SUK SY Civil syllabus

SUK · Second Year B.Tech. Civil Engineering · NEP 2020

Structural Mechanics

CE0242 · Semester IV · 3 credits · ISE 10 + mid-semester 30 + ESE 60

  1. Unit 1: Principal Planes and Stresses

    7 hours

    Normal and shear stresses on oblique planes; principal planes and stresses by analytical and graphical (Mohr's circle) methods; maximum normal stress, maximum shear stress and maximum strain energy theories of failure.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stresses on an oblique plane
    • Principal stresses and maximum shear stress
    • Mohr's circle
    • Theories of failure
  2. Unit 2: Torsion of Circular Shafts

    6 hours

    Circular shafts in torsion; power transmitted; shafts under combined bending, torsion and axial thrust.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Torsion of circular shafts
    • Power transmitted by shafts
    • Combined bending and torsion of shafts
  3. Unit 3: Influence Line Diagrams

    7 hours

    The Müller-Breslau principle for statically determinate beams; influence lines for member forces in determinate trusses.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Müller-Breslau principle
    • Influence lines for beams
    • Influence lines for trusses
  4. Unit 4: Buckling of Long Columns

    6 hours

    Effective length for different end conditions, slenderness ratio; Euler's and Rankine's theories.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Euler's theory of columns and effective length
    • Rankine's formula
  5. Unit 5: Slope and Deflection of Determinate Beams

    7 hours

    Double integration, Macaulay's, moment-area and conjugate beam methods.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Double integration and moment-area methods
    • Slope and deflection by Macaulay's method
    • Conjugate beam method
  6. Unit 6: Combined Direct and Bending Stresses

    6 hours

    Eccentric loads and the core of a section; stability of gravity dams, retaining walls and chimneys.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Direct and bending stresses: eccentric loading
    • Core of a section
    • Retaining walls, dams and chimneys

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.