SUK SY Civil syllabus

SUK · Second Year B.Tech. Civil Engineering · NEP 2020

Strength of Materials

CE0233 · Semester III · 3 credits · ISE 10 + mid-semester 30 + ESE 60

  1. Unit 1: Stress and Strain

    7 hours

    Engineering properties of materials; stress, strain and stress-strain behaviour of ductile and brittle materials; elastic constants, Hooke's law and their relations; composite sections under axial load.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stress, strain and stress–strain diagrams
    • Elastic constants and their relations
    • Bars of composite sections
  2. Unit 2: Temperature Stresses and Strain Energy

    6 hours

    Temperature stresses; strain energy under gradually applied, suddenly applied and impact loads.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Temperature stresses
    • Strain energy under gradual, sudden and impact loads
  3. Unit 3: Analysis of Trusses

    6 hours

    Trusses by the method of joints and the method of sections.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Analysis of trusses by joints and sections
  4. Unit 4: Shear Force and Bending Moment Diagrams

    7 hours

    Relations between load, shear force and bending moment; SFD and BMD for point loads, UDL, UVL and couples on determinate beams.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Shear force and bending moment: concepts and relations
    • SFD and BMD for point loads and UDL
    • SFD and BMD for UVL and couples
    • Points of contraflexure
  5. Unit 5: Bending Stresses

    6 hours

    Assumptions and theory of pure bending, the flexure formula; bending stresses in symmetrical and unsymmetrical sections.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Theory of simple bending and the flexure formula
    • Bending stress distribution and moment of resistance
  6. Unit 6: Shear Stresses

    7 hours

    Shear stress distribution in beams, maximum and average shear stress, distribution diagrams for common sections.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Shear stress formula
    • Shear stress distribution across sections

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.