SPPU · Third Year Mechanical Engineering · 2024 Pattern
Refrigeration & Air-conditioning
PCC352-MEC · Semester VI · 3 credits · CCE 30 + end-semester 70
Unit 1: Vapour Refrigeration Systems
8 hoursThe simple vapour compression cycle on T–s and p–h diagrams, COP, EER, SEER and IPLV, the effect of operating conditions, the actual cycle; simple vapour absorption, aqua-ammonia and lithium bromide–water systems, and VCC vs VAS.
Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)
- Vapour compression cycle
- Performance ratings: COP, EER and SEER
- Effect of operating conditions on the VCC
- Vapour absorption refrigeration
- Lithium bromide–water absorption system
Unit 2: Multi Pressure Refrigeration Systems
7 hoursNeed for multistaging, two-stage compression with flash gas removal and flash intercooling; multi-evaporator systems with one or more compressors and expansion valves; the ammonia–CO₂ cascade.
Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)
- Multistage compression with flash intercooling
- Multi-evaporator systems
- Cascade refrigeration
Unit 3: Refrigeration System Components
8 hoursReciprocating, rotary, screw and centrifugal compressors; air-cooled, water-cooled and evaporative condensers; flooded, dry-expansion and plate evaporators; thermostatic and electronic expansion valves and capillary tubes; safety and control devices.
Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)
- Refrigerant compressors
- Condensers
- Evaporators
- Expansion devices
- Refrigeration controls and safety devices
Unit 4: Applied Psychrometry and Cooling Load Estimation
8 hoursPsychrometric properties and the chart, psychrometric processes, apparatus dew point and bypass factor, SHF, RSHF, GSHF and ESHF; internal, solar, ventilation and infiltration loads and the CLTD/CLF method; thermal comfort, indoor air quality and outdoor design conditions.
Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)
- Psychrometric properties of air
- Psychrometric processes and the chart
- Bypass factor, ADP and sensible heat factors
- Cooling load estimation
- Thermal comfort and indoor air quality
Unit 5: Ventilation, Air Distribution and Modern HVAC Systems
8 hoursNatural and mechanical ventilation; duct layout and materials, friction and dynamic losses, equivalent diameter; equal friction, static regain and velocity reduction methods; filters, diffusers, grilles, dampers and fan-coil units, fans and fan laws; VRF, VAV, desiccant and evaporative cooling, thermal storage, clean rooms and radiant cooling.
Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)
- Ventilation and infiltration
- Duct design and pressure losses
- Duct design methods
- Air distribution and fans
- Modern HVAC systems
Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.