SPPU TE Mechanical syllabus

SPPU · Third Year Mechanical Engineering · 2024 Pattern

Heat & Mass Transfer

PCC301-MEC · Semester V · 4 credits · CCE 30 + end-semester 70

  1. Unit 1: Introduction and Conduction (Steady State)

    8 hours

    Modes of heat transfer and their laws, the general conduction equation (derived in Cartesian, stated in cylindrical and spherical coordinates), thermal conductivity and diffusivity; 1D steady conduction in walls, cylinders and spheres, overall coefficient, the electrical analogy and contact resistance; conduction with heat generation.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Modes of heat transfer and their laws
    • General heat conduction equation
    • Steady conduction through plane walls
    • Conduction through cylinders and spheres
    • Thermal resistance networks and overall coefficient
    • Conduction with internal heat generation
  2. Unit 2: Finned Surfaces, Thermal Insulation and Transient Heat Conduction

    8 hours

    Fins of uniform section: temperature distribution and heat flow for long and insulated-tip fins, fin efficiency and effectiveness; insulation and the critical radius for cylinders and spheres; lumped heat capacity, Biot and Fourier numbers and Heisler charts.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Heat transfer from fins
    • Fin efficiency and effectiveness
    • Critical radius of insulation
    • Lumped heat capacity analysis
    • Biot and Fourier numbers and Heisler charts
  3. Unit 3: Convective Heat Transfer, Mass Transfer

    8 hours

    Hydrodynamic and thermal boundary layers, local and average coefficients, Reynolds, Prandtl and Nusselt numbers, forced-convection correlations for external and internal flow; natural convection, Grashof and Rayleigh numbers, plates, cylinders and spheres; Fick's law of diffusion.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Convection and boundary layers
    • Dimensionless numbers in convection
    • Forced convection correlations
    • Natural convection
    • Mass transfer and Fick's law
  4. Unit 4: Radiation Heat Transfer

    6 hours

    Black-body radiation, intensity, Kirchhoff's, Planck's, Wien's, Stefan–Boltzmann and Lambert's laws; emissivity, absorptivity, reflectivity, transmissivity, radiosity and irradiation; shape factors and their laws, exchange between plates, cylinders and spheres, radiation shields.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Laws of thermal radiation
    • Radiation properties of surfaces
    • Shape factors
    • Radiation exchange between surfaces
    • Radiation shields
  5. Unit 5: Heat Exchangers, Boiling and Condensation

    7 hours

    Classification of heat exchangers, overall coefficient and fouling; the LMTD method; the effectiveness–NTU method; the pool-boiling curve and critical heat flux; film and dropwise condensation.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • Classification of heat exchangers and fouling
    • LMTD method
    • Effectiveness–NTU method
    • Boiling heat transfer
    • Condensation heat transfer

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.