SPPU TE Mechanical syllabus

SPPU · Third Year Mechanical Engineering · 2024 Pattern

Advanced Machining Processes

PEC 362D-MEC · Elective II · Semester VI · 3 credits · CCE 30 + end-semester 70

One of the Elective II options.

All notes for this subject
  1. Unit 1: Special Forming Processes

    7 hours

    High-energy-rate and high-velocity forming, explosive, magnetic pulse and electro-hydraulic forming; spinning, flow and stretch forming, incremental sheet forming, Petro-forge; micro forming, coining, extrusion and laser bending; fine blanking.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • High energy rate forming
    • Spinning, flow and stretch forming
    • Incremental sheet forming
    • Micro forming and fine blanking
  2. Unit 2: Advanced Joining Processes

    7 hours

    Friction stir, electron beam, laser and ultrasonic welding, underwater and cryogenic welding, thermal spray coatings, welding of plastics and composites, explosive joining and adhesive bonding.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Friction stir welding
    • Electron beam and laser beam welding
    • Underwater, explosive and ultrasonic joining
    • Thermal spraying and adhesive bonding
  3. Unit 3: Hybrid Non-conventional Machining Techniques

    7 hours

    Principles of hybrid machining; abrasive flow and magnetic abrasive finishing, abrasive water-jet and wire EDM; electrochemical grinding and deburring, shaped-tube electrolytic machining, electro-jet machining and ELID; ultrasonic-assisted and rotary EDM, electrochemical discharge machining; laser surface treatment.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Hybrid machining processes
    • Abrasive flow and magnetic abrasive finishing
    • Electrochemical grinding and deburring
    • Hybrid EDM processes
  4. Unit 4: Micro Machining and Nano Fabrication Techniques

    7 hours

    Need for micro and nano machining; diamond turning, ultrasonic micromachining, focused ion beam machining, lithography and photochemical machining; challenges.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Micro machining
    • Diamond turning
    • Lithography and nano fabrication
  5. Unit 5: Sustainable Machining

    7 hours

    Sustainable manufacturing and its environmental impact; dry, MQL, cryogenic and high-speed machining; chips, fluids and emissions, chip recycling, zero-waste strategies; cutting fluids and energy efficiency.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • Sustainable machining
    • Dry, MQL and cryogenic machining
    • Waste reduction and energy efficiency in machining

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.