SPPU · Third Year Electronics & Telecommunication Engineering · 2024 Pattern
Robotics and Automation
PEC-362B-ETC · Elective III · Semester VI · 3 credits · CCE 30 + end-semester 70
One of the Elective III options.
Unit 1: Measurement, Robotics and Automation Fundamentals
9 hoursStatic characteristics (accuracy, precision, sensitivity, linearity, resolution, hysteresis, drift) and dynamic characteristics of first- and second-order instruments; laws and types of robots including cobots; robot anatomy, degrees of freedom, coordinates and workspace; fixed, programmable and flexible automation; Industry 4.0.
Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)
- Static characteristics of instruments
- Dynamic characteristics of instruments
- Types of robots and robot anatomy
- Degrees of freedom and robot workspace
- Types of automation and Industry 4.0
Unit 2: Actuators, Drives, Control Loops and End Effectors
9 hoursOpen- and closed-loop control and PID; pneumatic components versus hydraulics; stepper, BLDC and AC servo motors; harmonic drives, ball screws and gearboxes; mechanical, vacuum and magnetic grippers; sensor calibration, signal conditioning and selection.
Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)
- Control loops and PID in robots
- Pneumatic and hydraulic actuators
- Stepper, BLDC and servo motors
- Mechanical transmission in robots
- End effectors and grippers
- Sensor selection and signal conditioning
Unit 3: Robot Kinematics and Programming
9 hoursJoint and Cartesian coordinates; forward and inverse kinematics; trajectory planning, point-to-point and continuous-path motion; lead-through, teach-pendant and offline programming; Arduino and Python for motion control; ROS; robot safety.
Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)
- Forward kinematics
- Inverse kinematics
- Trajectory planning
- Robot programming methods
- ROS and robot safety
Unit 4: Industrial Automation and PLCs
9 hoursIndustrial automation systems; PLC architecture, hardware and I/O modules; ladder logic, timers, counters and sequential control; SCADA and HMI; Modbus, CAN and Ethernet/IP.
Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)
- PLC architecture and I/O modules
- Ladder logic programming
- PLC timers and counters
- SCADA and HMI
- Industrial communication protocols
Unit 5: Applications of Robotics and Automation
9 hoursMaterial handling, welding, painting and pick-and-place robots; a pick-and-place system with sensing, controller and manipulator; a PLC-controlled conveyor with sensors and motor drive.
Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)
- Industrial robot applications
- Pick-and-place robotic system
- Automated conveyor system
Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.