SPPU TE E&TC syllabus

SPPU · Third Year Electronics & Telecommunication Engineering · 2024 Pattern

Power Electronics

PEC-362A-ETC · Elective III · Semester VI · 3 credits · CCE 30 + end-semester 70

One of the Elective III options.

All notes for this subject
  1. Unit 1: Power Devices

    12 hours

    SCR construction, V–I, switching and gate characteristics, turn-on and turn-off, triggering circuits and ratings; overvoltage, overcurrent, di/dt and dv/dt protection; power MOSFET, IGBT, GTO, TRIAC and UJT; SiC MOSFETs and GaN FETs.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • SCR construction and characteristics
    • SCR turn-on, turn-off and gate triggering
    • SCR ratings and protection
    • Power MOSFET and IGBT
    • GTO, TRIAC and UJT
    • SiC MOSFETs and GaN FETs
  2. Unit 2: AC to DC Converters

    6 hours

    Line and forced commutation; single-phase semi and full converters with R and R-L loads and their performance; effect of source and load inductance; three-phase half-controlled and fully controlled bridges with R load.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Line and forced commutation
    • Single-phase semi-converter
    • Single-phase full converter
    • Effect of source inductance
    • Three-phase controlled bridge converters
  3. Unit 3: DC to AC Converters: Inverters

    12 hours

    Single-phase half- and full-bridge square-wave inverters with R and R-L loads; cross-conduction; voltage control by SPWM and SVPWM; harmonic reduction and inverter performance parameters; the three-phase VSI in 180° mode.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Single-phase half-bridge and full-bridge inverters
    • Inverter voltage control: SPWM
    • Space vector PWM
    • Harmonic reduction and inverter performance
    • Three-phase voltage source inverter in 180° mode
  4. Unit 4: DC to DC Converters: Choppers

    6 hours

    Step-down and step-up choppers with R and R-L loads; control strategies; class A to E choppers, isolated and non-isolated; buck, boost and buck–boost SMPS.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Step-down and step-up choppers
    • Chopper control strategies
    • Chopper classes A to E
    • Buck, boost and buck–boost converters
  5. Unit 5: Power Electronics Applications

    9 hours

    AC voltage controllers, LED drivers, battery chargers, temperature control, DC motor drives, online and offline UPS; EV architecture, traction, BLDC control, battery management and charging standards; solar power systems.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • AC voltage controllers
    • UPS, battery chargers and LED drivers
    • DC motor drives
    • Electric vehicle power electronics
    • Battery management and EV charging

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.