SPPU TE E&TC syllabus

SPPU · Third Year Electronics & Telecommunication Engineering · 2024 Pattern

Embedded System Design

PCC-351-ETC · Semester VI · 3 credits · CCE 30 + end-semester 70

  1. Unit 1: Embedded Systems and Processor Architecture

    9 hours

    Classification and characteristics of embedded systems, design metrics and optimisation; microcontroller, microprocessor and SoC; ARM Cortex overview; hardware–software co-design, the embedded design life cycle and the waterfall model.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Embedded systems: classification and characteristics
    • Design metrics and optimisation
    • Microcontroller, microprocessor and SoC
    • ARM Cortex architecture overview
    • Hardware–software co-design and the design life cycle
  2. Unit 2: Real-time Operating Systems

    9 hours

    Real-time concepts, tasks and threads, scheduling algorithms and context switching; priority inversion, deadlock and mutual exclusion; semaphores and mutexes; inter-task communication; RTOS memory management; FreeRTOS.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Real-time systems, tasks and threads
    • RTOS scheduling algorithms
    • Context switching and priority inversion
    • Semaphores, mutexes and deadlock
    • Inter-task communication
    • RTOS memory management and FreeRTOS
  3. Unit 3: Embedded Linux

    8 hours

    Why embedded Linux; its architecture and boot process, bootloaders and U-Boot; kernel configuration, device drivers and file systems; cross-compilation and debugging tools.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Embedded Linux architecture
    • Boot process, bootloaders and U-Boot
    • Kernel configuration and device drivers
    • File systems, cross-compilation and debugging
  4. Unit 4: STM32 Programming and Peripheral Interfacing

    9 hours

    STM32 microcontrollers and STM32CubeIDE; GPIO, timers, interrupts, ADC and DAC; UART, SPI and I2C; sensor and actuator interfacing.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • STM32 and STM32CubeIDE
    • STM32 GPIO, timers and interrupts
    • STM32 ADC and DAC
    • UART, SPI and I2C on STM32
    • Sensor and actuator interfacing
  5. Unit 5: Testing, Edge AI and Applications

    9 hours

    Unit and integration testing, hardware and JTAG debugging, simulators and emulators; edge AI and TinyML, deployment with TensorFlow Lite and Edge Impulse; applications in agriculture, EV charging, automation, healthcare and vending.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • Embedded software testing
    • Hardware and JTAG debugging, simulators and emulators
    • Edge AI and TinyML
    • Deploying models with TensorFlow Lite and Edge Impulse

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.