SPPU TE E&TC syllabus

SPPU · Third Year Electronics & Telecommunication Engineering · 2024 Pattern

Cellular Network

PCC-302-ETC · Semester V · 3 credits · CCE 30 + end-semester 70

  1. Unit 1: Introduction to Digital Communication

    9 hours

    The digital communication block diagram; ASK, PSK, QPSK and QAM (M-ary) with bandwidth and power trade-offs; bit, baud and symbol rate; signal-space representation; inter-symbol interference, channel distortion and delay spread, the Nyquist criterion for zero ISI, eye diagrams and ISI reduction.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Digital communication system and its advantages
    • ASK, PSK and QPSK
    • QAM and M-ary signalling
    • Bit rate, baud rate and bandwidth
    • Signal space representation
    • Inter-symbol interference and the Nyquist criterion
    • Eye diagrams and ISI reduction
  2. Unit 2: Mobile Wireless Channel

    9 hours

    Radio propagation, the free-space model, the two-ray ground-reflection model, the Hata model and receiver noise; channel estimation and diversity; the evolution of mobile radio and cellular architecture; frequency reuse, cell splitting and sectoring; handoff and roaming.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Free-space and two-ray propagation models
    • Hata model and receiver noise
    • Channel estimation and diversity
    • Cellular concept and network architecture
    • Frequency reuse, cell splitting and sectoring
    • Handoff and roaming
  3. Unit 3: OFDM and MIMO

    9 hours

    Multicarrier basics and OFDM, OFDM bit error rate and the effect of frequency offset; MIMO system model, MIMO-OFDM and its advantages; SNR and SINR calculations.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Multicarrier modulation and OFDM
    • OFDM bit error rate and frequency offset
    • MIMO system model
    • MIMO-OFDM
    • SNR and SINR calculations
  4. Unit 4: Wireless System Planning, Technologies and Protocols

    9 hours

    Link-budget analysis; tele-traffic theory, its system model and steady-state analysis; LTE-Advanced, 5G architecture and wireless LANs; simulating wireless networks.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Link budget analysis
    • Tele-traffic theory and the Erlang model
    • LTE-Advanced
    • 5G architecture
    • Wireless LANs
  5. Unit 5: Performance Evaluation and Analysis

    9 hours

    Why and how to evaluate cellular networks: QoS and key performance parameters (RSSI, RSRP, RSRQ, SINR, throughput, latency); KPI monitoring, drive tests, simulation and traffic measurement; coverage, capacity, mobility, interference and data-service issues; cell splitting, sectoring, load balancing and power control.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • Cellular network QoS and key performance indicators
    • RSSI, RSRP, RSRQ and SINR
    • Drive testing and KPI monitoring
    • Coverage, capacity and interference issues
    • Network optimisation: load balancing and power control

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.