SPPU TE Electrical syllabus

SPPU · Third Year Electrical Engineering · 2024 Pattern

Microcontroller and Embedded Systems

PEC-321A-ELE · Elective I · Semester V · 3 credits · CCE 30 + end-semester 70

One of the Elective I options.

All notes for this subject
  1. Unit 1: PIC Architecture and Embedded C

    8 hours

    Microprocessors versus microcontrollers; pin diagram and architecture of the PIC18F458; CISC versus RISC; data and program memory, program counter, stack pointer and status register; I/O ports and their SFRs; preprocessor directives in embedded C.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Microprocessors and microcontrollers
    • PIC18F458 architecture
    • PIC memory organisation
    • I/O ports and SFRs
    • Embedded C basics
  2. Unit 2: Port and Timer Programming

    8 hours

    I/O port programming in C; PIC18 timers and their SFRs; Timer0 programming; delays with and without Timer0; 16x2 LCD interfacing in 4-bit mode.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • I/O port programming in C
    • PIC18 timers
    • Delay generation with Timer0
    • LCD interfacing
  3. Unit 3: CCP Module

    8 hours

    The capture/compare/PWM module and the timers it uses; square waves in compare mode; period measurement in capture mode; DC motor speed control in PWM mode.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • CCP module of the PIC18
    • Compare mode
    • Capture mode
    • PWM mode and DC motor speed control
  4. Unit 4: Interrupts and the ADC

    8 hours

    PIC18F458 interrupt structure and SFRs; interrupt programming in C; Timer0 and INT0 interrupts; ADC basics and the on-chip ADC; ADC programming with interrupts.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • PIC interrupt structure
    • Interrupt programming in C
    • On-chip ADC of the PIC18
    • ADC programming with interrupts
  5. Unit 5: Serial Communication and Applications

    8 hours

    USART and its SFRs; transmitting and receiving serial data; SPI, MODBUS and CAN; LM35, ACS712 and ZMPT101B sensors; measuring temperature and power with a PIC.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • USART serial communication
    • SPI, MODBUS and CAN
    • Sensor interfacing: LM35, ACS712 and ZMPT101B
    • Measuring temperature and power with a PIC

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.