SPPU TE Electrical syllabus

SPPU · Third Year Electrical Engineering · 2024 Pattern

Electric Vehicles I

PEC-361A-ELE · Elective II · Semester VI · 3 credits · CCE 30 + end-semester 70

One of the Elective II options.

All notes for this subject
  1. Unit 1: Hybrid and Electric Vehicles

    8 hours

    The need for electric mobility; EV components; BEV, HEV, PHEV and FCEV; evolution of EVs; EVs compared with hybrids and IC engines; advantages, challenges and the EV roadmap.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Need for electric mobility
    • Components of an electric vehicle
    • BEV, HEV, PHEV and FCEV
    • EVs versus IC engine vehicles
  2. Unit 2: Batteries and Battery Management

    8 hours

    Energy storage needs; lithium-ion batteries; voltage, capacity, C-rate and efficiency; BMS functions and protection; SOC, SOH and SOF; cell balancing and thermal management; ageing and fast charging.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Battery technologies for EVs
    • Battery performance parameters
    • Battery management systems
    • SOC and SOH estimation
    • Cell balancing and thermal management
  3. Unit 3: Vehicle Dynamics

    8 hours

    Tyre and wheel fundamentals, rolling resistance and aquaplaning; vehicle classification; forces at rest, accelerating and braking; rolling, aerodynamic, gradient and acceleration resistance; power and torque requirements, gradeability and acceleration; traction and braking.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Tyres and rolling resistance
    • Forces acting on a vehicle
    • Driving resistances
    • Power and torque requirements
    • Traction and braking dynamics
  4. Unit 4: EV Drives and Charging

    7 hours

    BLDC, SRM and PMSM motors and their comparison; power electronics for EV drives; AC and DC charging, charging levels and standards; EVSE; SiC and GaN devices; thermal challenges.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Motors for electric vehicles
    • Power electronics in EV drives
    • AC and DC charging
    • Charging levels and standards
  5. Unit 5: V2H, V2V and V2G

    9 hours

    Vehicle-to-home, vehicle-to-vehicle and vehicle-to-grid; smart charging and demand response; EVs as distributed energy resources; grid impact; aggregators; communication standards; cybersecurity of charging.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • Vehicle-to-grid concepts
    • Smart charging and demand response
    • EVs as distributed energy resources
    • Cybersecurity in EV charging

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.