SPPU TE Electrical syllabus

SPPU · Third Year Electrical Engineering · 2024 Pattern

Control System Engineering

PCC-352-ELE · Semester VI · 4 credits · CCE 30 + end-semester 70

  1. Unit 1: Control System Basics

    8 hours

    Open- and closed-loop, time-variant and time-invariant, servo, regulator, SISO and MIMO systems; transfer functions, poles and zeros; modelling electrical and mechanical systems and their analogy; signal flow graphs and Mason's gain formula.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Open-loop and closed-loop systems
    • Transfer function, poles and zeros
    • Modelling electrical and mechanical systems
    • Electrical-mechanical analogies
    • Signal flow graphs and Mason's gain formula
  2. Unit 2: Time-domain Analysis

    8 hours

    Transient and steady-state response; step, ramp, parabolic and impulse inputs; type and order of a system; step response of first- and second-order systems; time-domain specifications; steady-state error and static error coefficients.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Standard test signals
    • Response of first-order systems
    • Response of second-order systems
    • Time-domain specifications
    • Steady-state error and error coefficients
  3. Unit 3: Stability and Root Locus

    8 hours

    Stability and pole locations in the s-plane; the Routh–Hurwitz criterion; angle and magnitude conditions; constructing a root locus and judging stability from it.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Stability and pole locations
    • Routh-Hurwitz criterion
    • Root locus construction
    • Stability from the root locus
  4. Unit 4: Frequency-domain Analysis

    8 hours

    Frequency-domain specifications and their correlation with time-domain ones; sketching Bode plots and judging stability from them; polar plots.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Frequency-domain specifications
    • Bode plots
    • Gain margin and phase margin
    • Polar plots
  5. Unit 5: PID Controller Design

    8 hours

    P, PI and PID controllers; time-domain design specifications; Ziegler–Nichols tuning by both methods; lag and lead networks.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • P, PI and PID controllers
    • Ziegler-Nichols tuning
    • Lead and lag networks

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.