SPPU TE Civil syllabus

SPPU · Third Year Civil Engineering · 2024 Pattern

Hydrology and Water Resource Engineering

PEC-361A-CVL · Elective II · Semester VI · 3 credits · CCE 30 + end-semester 70

One of the Elective II options.

  1. Unit 1: Hydrology and Precipitation

    9 hours

    The hydrological cycle and agencies (IMD, NIH, CWC, CWPRS); precipitation and rain-gauge networks; rainfall analysis, mean areal precipitation, DAD and frequency analysis; evaporation, evapotranspiration and infiltration indices.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Hydrological cycle
    • Precipitation and rain gauges
    • Mean areal precipitation
    • Evaporation and evapotranspiration
    • Infiltration and infiltration indices
  2. Unit 2: Runoff, Hydrographs and Floods

    9 hours

    Runoff factors and estimation; hydrograph components and base-flow separation; unit, S-curve and synthetic hydrographs; stream gauging; floods by the rational formula and frequency analysis; Muskingum routing.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Runoff and its estimation
    • Hydrographs and base flow separation
    • Unit hydrograph and S-curve
    • Stream gauging
    • Flood estimation and frequency analysis
    • Flood routing: Muskingum method
  3. Unit 3: Reservoir Planning

    9 hours

    Reservoir investigations; mass curves and capacity; elevation–capacity curves and dependable yield; losses and sedimentation, density currents, trap efficiency and useful life; cost apportionment.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Reservoir capacity by mass curve
    • Reservoir sedimentation and trap efficiency
    • Reservoir economics and cost apportionment
  4. Unit 4: Groundwater and Water Management

    9 hours

    Aquifers, specific yield and Darcy's law; safe yield; well hydraulics, tube and open wells; waterlogging, drainage and reclamation of saline and alkaline land; warabandi and participatory irrigation management.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Aquifers and their properties
    • Well hydraulics
    • Waterlogging and land reclamation
    • Water distribution: warabandi and participatory management
  5. Unit 5: Irrigation

    9 hours

    Surface, subsurface and micro-irrigation; soil–water–crop relations, consumptive use and crop water requirement; duty, delta and efficiencies; canal capacity; piped distribution networks; canal revenue.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • Methods of irrigation
    • Crop water requirement and consumptive use
    • Duty, delta and irrigation efficiencies
    • Canal capacity and piped distribution networks

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.