SPPU TE Civil syllabus

SPPU · Third Year Civil Engineering · 2024 Pattern

Geotechnical Engineering

PCC-302-CVL · Semester V · 3 credits · CCE 30 + end-semester 70

  1. Unit 1: Introduction and Index Properties

    9 hours

    Soil structure, Indian soil deposits, clay minerals and field identification; soil exploration by pits, borings, core recovery, RQD and geophysics; three-phase relationships; index properties; IS, unified, AASHTO and triangular classification.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Soil formation, structure and clay minerals
    • Soil exploration methods
    • Three-phase system and weight–volume relationships
    • Index properties of soil
    • Soil classification systems
  2. Unit 2: Permeability and Earth Pressure

    9 hours

    Darcy's law and factors affecting permeability; stratified deposits; seepage pressure, quicksand and critical gradient; the Laplace equation; earth pressure at rest, active and passive by Rankine, including submerged backfill.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Darcy's law and permeability
    • Permeability of stratified soils
    • Seepage pressure and quicksand
    • Laplace equation for 2-D flow
    • Rankine's earth pressure theory
  3. Unit 3: Compaction and Stress Distribution

    9 hours

    Compaction versus consolidation; standard and modified Proctor tests and the zero-air-voids line; factors and effects; field compaction and its control; geostatic stress; Boussinesq for point and circular loads, pressure bulbs; Westergaard; approximate methods.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Compaction and Proctor tests
    • Field compaction and its control
    • Boussinesq's theory
    • Pressure bulb
    • Westergaard's and approximate methods
  4. Unit 4: Shear Strength of Soil

    9 hours

    Mohr's circle and the Mohr–Coulomb theory; effective stress and pore pressure; peak and residual strength; behaviour of sands and clays; direct shear, triaxial, unconfined and vane shear tests and drainage conditions; sensitivity and thixotropy; SPT, DCPT, SCPT and pressuremeter.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Effective stress principle
    • Mohr–Coulomb failure theory
    • Direct shear test
    • Triaxial test and drainage conditions
    • Unconfined compression and vane shear tests
    • Field tests: SPT and cone penetration
  5. Unit 5: Bearing Capacity

    9 hours

    Modes of shear failure; Terzaghi's and IS-code bearing capacity for strip, rectangular and circular footings; plate load test and SPT; Housel's method; layered soils, water table and eccentricity; presumptive values.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • Modes of shear failure
    • Terzaghi's bearing capacity theory
    • IS code method of bearing capacity
    • Plate load test
    • Effect of water table and eccentricity

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.