SPPU · Third Year Civil Engineering · 2024 Pattern
Foundation Engineering
PEC-361C-CVL · Elective II · Semester VI · 3 credits · CCE 30 + end-semester 70
One of the Elective II options.
Unit 1: Subsurface Investigation
9 hoursPlanning exploration; pits, borings, core recovery and RQD; seismic refraction and resistivity; disturbed and undisturbed sampling and samplers; SPT and its corrections, DCPT, SCPT and pressuremeter; bore logs and soil reports.
Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)
- Planning subsurface exploration
- Boring, sampling and samplers
- SPT and its corrections
- Cone penetration and pressuremeter tests
- Soil investigation report
Unit 2: Bearing Capacity
9 hoursModes of failure; Terzaghi's, Hansen's, Meyerhof's, Skempton's and Vesic's equations and the IS method; plate load test and SPT; Housel's method; layered soil, water table and eccentricity; presumptive values.
Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)
- Terzaghi's bearing capacity theory
- Meyerhof, Hansen, Vesic and IS methods
- Plate load test
- Layered soils, water table and eccentricity
Unit 3: Immediate and Consolidation Settlement
9 hoursContact pressure, significant depth and IS limits on total and differential settlement; settlement from plate load and SPT; Terzaghi's consolidation theory, the oedometer test, square-root and log-time fitting, time factor; normal and over-consolidation.
Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)
- Immediate settlement
- Allowable and differential settlement
- Terzaghi's consolidation theory
- Coefficient of consolidation
- Normally and over-consolidated clays
Unit 4: Pile Foundations
9 hoursClassification and installation; static capacity; ENR, modified ENR and Hiley formulae; load tests; group action and efficiency; negative skin friction; group settlement; uplift; micropiles.
Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)
- Classification and installation of piles
- Static capacity of piles
- Dynamic pile formulae
- Pile load tests
- Pile groups and negative skin friction
Unit 5: Piers, Caissons and Well Foundations
9 hoursPiers and caissons; well components, sinking by sand island, shapes, tilts and shifts; bearing capacity and depth; forces and lateral stability by Terzaghi's and IRC methods.
Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)
- Piers and caissons
- Well foundations: components and sinking
- Tilts and shifts in wells
- Lateral stability of well foundations
Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.