SPPU TE Civil syllabus

SPPU · Third Year Civil Engineering · 2024 Pattern

Design of Reinforced Concrete Structures

PCC-351-CVL · Semester VI · 3 credits · CCE 30 + end-semester 70

  1. Unit 1: Limit State Design and Sectional Analysis

    9 hours

    Working stress versus limit state design; limit states of collapse, serviceability and durability; characteristic strengths and loads and partial safety factors; assumptions, strain and stress diagrams; singly and doubly reinforced rectangular and singly reinforced flanged sections.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Working stress and limit state methods
    • Characteristic loads, strengths and partial safety factors
    • Singly reinforced rectangular sections
    • Doubly reinforced sections
    • Flanged sections
  2. Unit 2: Design of Slabs

    9 hours

    One-way simply supported, cantilever and continuous slabs; two-way simply supported, continuous and restrained slabs; detailing to SP 34 and IS 13920.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • One-way slabs
    • Cantilever and continuous slabs
    • Two-way slabs
    • Reinforcement detailing of slabs
  3. Unit 3: Design of Staircases and Beams

    9 hours

    Dog-legged and open-well staircases with detailing; simply supported and cantilever beams in flexure (singly, doubly reinforced and flanged); shear, bond and torsion.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Dog-legged staircase
    • Open-well staircase
    • Beams in flexure
    • Design for shear
    • Bond, development length and torsion
  4. Unit 4: Design of Continuous Beams

    9 hours

    Analysis and design of rectangular and flanged continuous beams by IS 456 coefficients and moment redistribution.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Continuous beams by IS code coefficients
    • Moment redistribution
    • Detailing continuous beams
  5. Unit 5: Design of Columns and Footings

    9 hours

    Column types, assumptions and minimum eccentricity; short columns under axial load and uniaxial or biaxial bending with SP 16 interaction curves; isolated footings for axial load and uniaxial bending.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • Short columns under axial load
    • Columns with uniaxial and biaxial bending
    • Isolated footings

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.