SPPU SE Mechanical syllabus

SPPU · Second Year Mechanical Engineering · 2024 Pattern (Revised)

Solid Mechanics

PCC-201-MEC · Semester III · 3 credits · CCE 40 + end-semester 60

  1. Unit 1: Simple Stresses & Strains

    8 hours

    Static, dynamic and impact loads; Hooke's law, Poisson's ratio and the elastic moduli and their interrelation; stress–strain diagrams for ductile and brittle materials, factor of safety; stresses in determinate and indeterminate, homogeneous and composite bars; thermal stresses in plain and composite members.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Types of loads, stress and strain
    • Hooke's law and elastic constants
    • Relations between elastic constants
    • Stress–strain diagrams and factor of safety
    • Bars of varying section and composite bars
    • Statically indeterminate bars
    • Thermal stresses in plain and composite bars
  2. Unit 2: Shear Force & Bending Moment Diagrams

    7 hours

    SFD and BMD for statically determinate beams under point loads, UDL, UVL, couples and combined loading; relation between load, shear force and bending moment; zero shear, maximum bending moment and the point of contraflexure.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Beams, supports and types of loading
    • SFD and BMD for point loads and UDL
    • SFD and BMD for UVL, couples and combined loads
    • Relation between load, shear force and bending moment
    • Maximum bending moment and point of contraflexure
  3. Unit 3: Bending & Shear Stresses

    7 hours

    Theory of simple bending and its assumptions, the flexure formula, moments of inertia of circular, hollow, rectangular, I and T sections, bending-stress distribution; transverse shear stress and its distribution across the same sections.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Theory of simple bending and the flexure formula
    • Moment of inertia of common sections
    • Bending stress distribution and section modulus
    • Shear stress distribution in beams
  4. Unit 4: Torsion & Buckling

    7 hours

    Torsion of circular shafts: assumptions and the torsion formula, stepped and composite shafts, power transmission on strength and rigidity, torsional resilience; buckling of columns: end conditions, Euler's critical and safe loads and the limits of Euler's theory.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Torsion of circular shafts
    • Stepped and composite shafts
    • Power transmission by shafts: strength and rigidity
    • Torsional resilience
    • Euler's theory of columns and end conditions
    • Limitations of Euler's theory
  5. Unit 5: Principal Stresses, Theories of Failure

    7 hours

    Transformation of plane stress, principal stresses and planes by the analytical method and Mohr's circle, combined normal and shear stresses; maximum principal stress, maximum shear stress and distortion energy theories, with principal strain and strain energy theories in theory only.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (8 marks, Unit 5)

    • Stresses on an oblique plane
    • Principal stresses and planes
    • Mohr's circle for plane stress
    • Combined normal and shear stresses
    • Theories of elastic failure

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.