SPPU SE IT syllabus

SPPU · Second Year Information Technology · 2024 Pattern (Revised)

Processor Architecture

MDM-271-ITT · Semester IV · 2 credits · CCE 40 + end-semester 60

All notes for this subject
  1. Unit 1: Fundamentals of PIC Microcontrollers

    8 hours

    Microprocessor versus microcontroller; what a PIC is, its architecture and core components, PIC families, development tools and languages, and typical applications.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Microprocessor versus microcontroller
    • PIC microcontroller and its families
    • PIC development tools and languages
  2. Unit 2: PIC18 Architecture

    8 hours

    Selecting a microcontroller; PIC18 features and pin diagram; internal architecture: ALU, EEPROM, RAM, I/O ports, timers, ADC and serial port; the programming model, bus architecture, registers and interrupts; program and data memory organisation.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • PIC18 features and pin diagram
    • PIC18 internal architecture
    • PIC18 programming model and registers
    • PIC18 memory organisation
    • PIC18 interrupts
  3. Unit 3: PIC I/O Ports, Timers and Counters

    8 hours

    Port structure and PORTx, TRISx and LATx; bit-level I/O; Timer0 and Timer1 and their registers; delays with timers; Embedded C programs.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • PIC18 I/O ports: PORT, TRIS and LAT
    • Bit-level I/O in Embedded C
    • PIC18 timers and counters
    • Delay generation with timers
  4. Unit 4: PIC Interfacing

    8 hours

    Interrupt structure and SFRs, PORTB-change and timer interrupts; capture, compare and PWM with DC motor speed control; the ADC and sensor interfacing; LEDs, 16×2 LCD, keypad, seven-segment display, relay and buzzer; RS232, I2C, SPI and UART in Embedded C.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • PIC18 interrupts
    • CCP: capture, compare and PWM
    • ADC and sensor interfacing
    • Interfacing LCD, keypad and seven-segment displays
    • Serial communication: UART, I2C and SPI
  5. Unit 5: Current Trends in Processor Architecture

    8 hours

    ARM and RISC design philosophy; ARM versions, features and suitability for embedded systems; the programmer's model and CPSR; PIC versus ARM; modern performance techniques.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (10 marks, Unit 5)

    • RISC and the ARM design philosophy
    • ARM programmer's model and CPSR
    • PIC versus ARM
    • Techniques for improving processor performance

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.