SPPU SE IT syllabus

SPPU · Second Year Information Technology · 2024 Pattern (Revised)

Basics of Computer Network

PCC-203-ITT · Semester III · 3 credits · CCE 40 + end-semester 60

All notes for this subject
  1. Unit 1: Computer Networking Fundamentals

    6 hours

    Elements of data communication; LAN, MAN and WAN; star, ring, mesh and hybrid topologies; protocols and layered architecture; the OSI model and the TCP/IP suite.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Data communication system and its elements
    • Types of networks: LAN, MAN and WAN
    • Network topologies
    • OSI reference model
    • TCP/IP protocol suite
  2. Unit 2: Data Communications

    6 hours

    Analog and digital signals; digital-to-digital, analog-to-digital (PCM), digital-to-analog and analog-to-analog conversion; simplex, half- and full-duplex; FDM and TDM; guided and wireless media; circuit and packet switching, datagrams and virtual circuits.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Analog and digital signals
    • Line coding and PCM
    • Digital-to-analog and analog-to-analog conversion
    • Transmission modes
    • Multiplexing: FDM and TDM
    • Transmission media
    • Circuit switching and packet switching
  3. Unit 3: Data Link Layer and Multiple Access

    6 hours

    ALOHA and CSMA/CD, Ethernet; repeaters, hubs, switches, bridges, routers and gateways; checksum and CRC; framing, flow and error control, stop-and-wait, sliding window, Go-Back-N and selective repeat; HDLC and PPP; FDMA, TDMA and CDMA.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • ALOHA, CSMA/CD and Ethernet
    • Network devices: hubs, switches, bridges and routers
    • Error detection: checksum and CRC
    • Framing, flow and error control
    • Sliding window protocols: Go-Back-N and selective repeat
    • HDLC and PPP
    • Channelization: FDMA, TDMA and CDMA
  4. Unit 4: Network Layer

    6 hours

    Logical addressing, IPv4 and IPv6 addresses; address mapping and error reporting; delivery, forwarding and routing; frame relay and ATM; process-to-process delivery with UDP and TCP.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • IPv4 addressing
    • IPv6 addressing
    • Address mapping and error reporting
    • Delivery, forwarding and routing
    • Frame relay and ATM
  5. Unit 5: Networking Technologies

    6 hours

    DNS, WWW, URLs, HTTP, email (SMTP, POP), FTP and remote login; UDP, TCP and SCTP, congestion control and QoS; Wi-Fi and Bluetooth; 4G to 5G; cloud networking, SDN and NFV; IoT protocols such as MQTT and CoAP.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (10 marks, Unit 5)

    • DNS, HTTP and the web
    • Email, FTP and remote login
    • UDP, TCP and SCTP
    • Congestion control and quality of service
    • Wi-Fi, Bluetooth and 5G
    • SDN, NFV and IoT protocols

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.