SPPU SE E&TC syllabus

SPPU · Second Year Electronics & Telecommunication Engineering · 2024 Pattern

Digital Electronics

PCC-203-ETC · Semester III · 3 credits · CCE 40 + end-semester 60

  1. Unit 1: Combinational Logic Design

    9 hours

    Standard SOP and POS forms, K-map minimisation up to four variables with don't-cares; half and full adders and subtractors, look-ahead carry, code converters (BCD to Gray and Excess-3, binary to Gray), the 2-bit comparator, multiplexers, demultiplexers and their trees, 3:8 decoders.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • SOP and POS forms of logic functions
    • K-map minimisation with don't-care conditions
    • Adders, subtractors and the look-ahead carry generator
    • Code converters
    • Magnitude comparator
    • Multiplexers and multiplexer trees
    • Demultiplexers and decoders
  2. Unit 2: Sequential Logic Design

    9 hours

    The 1-bit memory cell and latches; clocked SR, JK, master–slave JK, D and T flip-flops, preset and clear, excitation tables and conversions; registers and shift registers; ring, twisted-ring, ripple, mod-n, up/down and synchronous counters; sequence generators.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Latches and the SR flip-flop
    • JK, master–slave JK, D and T flip-flops
    • Excitation tables and flip-flop conversion
    • Registers and shift registers
    • Ripple and mod-n counters
    • Synchronous and up/down counters
    • Ring and twisted-ring counters, sequence generators
  3. Unit 3: State Machines

    9 hours

    Moore and Mealy machines, state diagrams and tables, state reduction and assignment, implementing an FSM, sequence detectors; algorithmic state machine charts and their realisation.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Moore and Mealy machines
    • State diagrams, state tables and state reduction
    • State assignment and FSM implementation
    • Sequence detector design
    • ASM charts
  4. Unit 4: Digital Logic Families and Programmable Logic Devices

    8 hours

    Fan-in, fan-out, noise margin, propagation delay and power dissipation; the TTL NAND gate; CMOS inverter, NAND and NOR, CMOS versus TTL; PROM, PAL and PLA architectures and designing with them; FPGA and CPLD architecture.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Characteristics of digital ICs
    • TTL NAND gate
    • CMOS gates and CMOS versus TTL
    • PROM, PAL and PLA
    • Designing combinational circuits with PLDs
    • CPLD and FPGA architecture
  5. Unit 5: Introduction to VHDL

    9 hours

    Library, entity and architecture; modelling styles, data objects, concurrent and sequential statements; VHDL for basic gates, full adder and subtractor, multiplexer, and D and T flip-flops in behavioural style.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (10 marks, Unit 5)

    • VHDL: library, entity and architecture
    • Modelling styles and data objects
    • Concurrent and sequential statements
    • VHDL for gates, adders and subtractors
    • VHDL for multiplexers and flip-flops

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.