SPPU · Second Year Electronics & Telecommunication Engineering · 2024 Pattern
Control Systems
PCC-253-ETC · Semester IV · 3 credits · CCE 40 + end-semester 60
Unit 1: Transfer Function & Time-domain Analysis
9 hoursOpen- and closed-loop systems, differential equations and transfer functions, poles and zeros, order and type; transfer functions of electrical systems; block-diagram reduction and signal-flow graphs; standard test inputs, steady-state error and error constants; transient response of first- and second-order systems and time-domain specifications.
Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)
- Open-loop and closed-loop control systems
- Transfer function, poles and zeros, order and type
- Block diagram reduction
- Signal flow graphs and Mason's gain formula
- Steady-state error and static error constants
- Response of first-order systems
- Second-order systems and time-domain specifications
Unit 2: Stability Analysis
9 hoursThe characteristic equation and pole locations; absolute and relative stability; the Routh–Hurwitz criterion; root locus: magnitude and angle conditions, construction, dominant poles and the effect of adding poles and zeros.
Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)
- Characteristic equation and pole locations
- Routh–Hurwitz stability criterion
- Root locus: rules and construction
- Effect of adding poles and zeros on the root locus
Unit 3: Frequency-domain Analysis
9 hoursFrequency response and its specifications (resonant peak, resonant frequency, bandwidth) and their link to time-domain specifications; polar and Bode plots; gain and phase crossover frequencies, gain and phase margins and stability.
Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)
- Frequency response and frequency-domain specifications
- Polar plot
- Bode plot
- Gain margin and phase margin
Unit 4: Modern Control Theory
8 hoursState-space representation and its advantages; transfer function from state space; physical- and phase-variable forms; controllability and observability, controllable and observable canonical forms; the state transition matrix and solving homogeneous state equations by the Laplace method.
Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)
- State-space representation
- Transfer function from state space
- Controllability and observability
- Canonical forms
- State transition matrix
Unit 5: Controllers and Industrial Automation
8 hoursON–OFF control and dead zone; P, I, D, PI, PD and PID controllers, offset and integral reset; Ziegler–Nichols tuning; PLCs and IoT-based industrial automation.
Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (10 marks, Unit 5)
- ON–OFF controllers
- P, PI, PD and PID controllers
- Ziegler–Nichols tuning
- PLC and IoT-based industrial automation
Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.