SPPU SE E&TC syllabus

SPPU · Second Year Electronics & Telecommunication Engineering · 2024 Pattern

Communication Engineering

PCC-251-ETC · Semester IV · 2 credits · CCE 40 + end-semester 60

  1. Unit 1: Fundamentals of Communication Systems

    9 hours

    The communication system block diagram; analog, digital, wired and wireless systems and regenerative repeaters; external and internal noise, noise calculations and noise figure; baseband and bandpass signals, signal energy and energy spectral density, power and power spectral density.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Elements and types of communication systems
    • Sources and types of noise
    • Noise calculations and noise figure
    • Baseband and bandpass signals
    • Energy and power spectral density
  2. Unit 2: Amplitude Modulation and Demodulation

    9 hours

    Need for modulation; AM, modulation index and spectrum, power efficiency; DSB-SC, SSB and VSB; envelope detection and the AM receiver.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Need for modulation and amplitude modulation
    • AM spectrum, modulation index and power
    • DSB-SC modulation
    • SSB and VSB modulation
    • Envelope detection and the AM superheterodyne receiver
  3. Unit 3: Frequency Modulation and Demodulation

    9 hours

    FM, modulation index, spectrum, bandwidth and power; phase versus frequency modulation and Bessel coefficients; narrowband and wideband FM; Armstrong's FM generation and PLL detection.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Frequency modulation and modulation index
    • FM spectrum, Bessel functions and Carson's rule
    • Phase modulation and its relation to FM
    • Narrowband and wideband FM
    • FM generation: Armstrong's method
    • FM detection using a PLL
  4. Unit 4: Pulse Modulation Techniques

    9 hours

    Sampling theorem and the Nyquist criterion, natural and flat-top sampling; PAM, PWM and PPM; line codes (RZ, NRZ, unipolar, bipolar, AMI, Manchester); quantisation error, uniform and non-uniform quantisation, companding; PCM, delta and adaptive delta modulation.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Sampling theorem and types of sampling
    • PAM, PWM and PPM
    • Line coding formats
    • Quantisation and companding
    • Pulse code modulation
    • Delta and adaptive delta modulation
  5. Unit 5: Applications of Communication Engineering

    8 hours

    Working principles and functional blocks of real systems: two-way radio (walkie-talkies), FM radio broadcasting, aviation and marine communication, and television fundamentals.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (10 marks, Unit 5)

    • Two-way radio communication
    • FM radio broadcasting
    • Aviation and marine communication
    • Television fundamentals

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.