SPPU SE Electrical syllabus

SPPU · Second Year Electrical Engineering · 2024 Pattern (Revised)

Power System Engineering I

PCC-203-ELE · Semester III · 3 credits · CCE 40 + end-semester 60

  1. Unit 1: Power System Basics and Tariffs

    6 hours

    Structure of a power system; connected load, maximum demand, demand, load, diversity, plant capacity and plant use factors, reserve capacity; load and load-duration curves; base and peak load stations; interconnected grids; tariff principles, two- and three-part, power-factor and TOD tariffs, ABT and kVAh tariffs.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Structure of a power system
    • Load curves and load factors
    • Base load and peak load stations
    • Tariff principles
    • Two-part and three-part tariffs
    • Power factor, TOD and kVAh tariffs
  2. Unit 2: Cables, Overhead Line Mechanics and Insulators

    6 hours

    Construction and classification of cables, dielectric stress in single-core cables and grading; overhead line components, sag with equal and unequal supports, ice and wind loading; pin, post, suspension, strain and shackle insulators; string efficiency and how to improve it.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Underground cables and dielectric stress
    • Grading of cables
    • Sag calculation for overhead lines
    • Effect of ice and wind loading
    • Types of overhead line insulators
    • String efficiency
  3. Unit 3: Resistance and Inductance of Lines

    6 hours

    Line resistance, skin and proximity effects; internal and external flux linkages; inductance of a single-phase line; GMR and GMD; transposition; three-phase lines with symmetrical and unsymmetrical spacing; bundled conductors.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Skin and proximity effects
    • Inductance of a single-phase line
    • GMR and GMD
    • Inductance of three-phase lines and transposition
    • Bundled conductors
  4. Unit 4: Capacitance of Lines

    6 hours

    Potential of a charged conductor and of conductors in a group; capacitance of a single-phase line with and without the earth's effect; GMR and GMD for capacitance; transposition; three-phase lines with symmetrical and unsymmetrical spacing; double-circuit lines.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Potential due to charged conductors
    • Capacitance of a single-phase line
    • Effect of earth on capacitance
    • Capacitance of three-phase lines
    • Double-circuit lines
  5. Unit 5: Performance of Transmission Lines

    6 hours

    Short, medium and long lines; short-line performance and phasor diagrams; nominal-π and nominal-T models; Ferranti effect; lines as two-port networks and ABCD constants; efficiency and regulation of short and medium lines.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (10 marks, Unit 5)

    • Classification of transmission lines
    • Performance of short lines
    • Nominal-T and nominal-pi models
    • ABCD constants
    • Ferranti effect
    • Efficiency and regulation of lines

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.