SPPU SE Electrical syllabus

SPPU · Second Year Electrical Engineering · 2024 Pattern (Revised)

Network Analysis

PCC-253-ELE · Semester IV · 2 credits · CCE 40 + end-semester 60

  1. Unit 1: Networks, Mesh and Nodal Analysis

    6 hours

    Independent and dependent sources; voltage and current dividers; source transformation; loop and node equations; supernode and supermesh; dot convention for series coupled circuits.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Independent and dependent sources
    • Source transformation
    • Mesh analysis and supermesh
    • Nodal analysis and supernode
    • Dot convention for coupled circuits
  2. Unit 2: Network Theorems

    6 hours

    Superposition, Thevenin's, Norton's, maximum power transfer, reciprocity and Millman's theorems for DC and AC networks with independent sources.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Superposition theorem
    • Thevenin's and Norton's theorems
    • Maximum power transfer theorem
    • Reciprocity and Millman's theorems
  3. Unit 3: Transients: Time-domain Approach

    6 hours

    Initial and final conditions; forced and free response; time constants of RL and RC circuits; classical solution of series and parallel RL, RC and RLC circuits.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Initial and final conditions
    • Time constants of RL and RC circuits
    • Transient response of RL and RC circuits
    • Transient response of RLC circuits
  4. Unit 4: Transients: Laplace Approach

    6 hours

    Laplace transforms of R, L and C; solving network equations with Laplace transforms for series and parallel RL, RC and RLC circuits; inverse transforms; transformed networks with initial conditions.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Laplace transforms of circuit elements
    • Transformed networks with initial conditions
    • Solving RLC circuits with Laplace transforms
  5. Unit 5: Network Functions and Filters

    6 hours

    One- and two-port network functions; poles and zeros and the restrictions on their locations; stability of active networks; passive low-pass and high-pass filters.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (10 marks, Unit 5)

    • Network functions of one-port and two-port networks
    • Poles and zeros of network functions
    • Stability of active networks
    • Passive low-pass and high-pass filters

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.