SPPU SE Electrical syllabus

SPPU · Second Year Electrical Engineering · 2024 Pattern (Revised)

Electrical Measurements & Instrumentation

PCC-201-ELE · Semester III · 3 credits · CCE 40 + end-semester 60

  1. Unit 1: Measuring Instruments and Instrument Transformers

    8 hours

    Absolute and secondary instruments; indicating, integrating and recording instruments; deflecting, controlling and damping systems; construction, torque equation, merits and demerits of PMMC and moving-iron instruments; CT and PT construction and connection, range extension of MI instruments, effect of opening a CT secondary; transformation, turns and nominal ratios and burden.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Classification of measuring instruments
    • Deflecting, controlling and damping systems
    • PMMC instruments
    • Moving-iron instruments
    • Current and potential transformers
    • Ratios and burden of instrument transformers
  2. Unit 2: Measurement of Resistance, Inductance and Capacitance

    8 hours

    Low, medium and high resistance; Kelvin's double bridge and the ammeter–voltmeter method; Wheatstone bridge; loss of charge and the megger; AC bridge sources, detectors and the balance equation; Maxwell's inductance and inductance–capacitance bridges; Schering bridge.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Kelvin's double bridge
    • Wheatstone bridge
    • Measuring high resistance: loss of charge and megger
    • AC bridge balance equation
    • Maxwell's bridges
    • Schering bridge
  3. Unit 3: Measurement of Power and Energy

    8 hours

    Dynamometer single-phase and poly-phase wattmeters, torque equation, errors and compensation; active and reactive power in balanced and unbalanced three-phase loads by one, two and three wattmeters; static single- and three-phase energy meters, TOD meters and net metering; calibration of wattmeters and energy meters.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Dynamometer wattmeter
    • Two-wattmeter method
    • Reactive power measurement in three-phase circuits
    • Static energy meters and TOD metering
    • Net metering
    • Calibration of wattmeters and energy meters
  4. Unit 4: Transducers and Non-electrical Quantities

    8 hours

    Classification and selection of transducers; resistive, inductive and capacitive pressure measurement, McLeod and Pirani gauges; resistive, inductive, capacitive, ultrasonic and float level measurement; LVDT and RVDT.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Classification and selection of transducers
    • Electrical methods of pressure measurement
    • McLeod and Pirani gauges
    • Level measurement methods
    • LVDT and RVDT
  5. Unit 5: Sensors and Digital Instruments

    8 hours

    Temperature, Hall-effect and piezoelectric sensors; advantages, resolution and sensitivity of digital meters; digital voltmeter, multimeter and frequency meter; power quality analyser; digital storage oscilloscope; basics of data acquisition systems.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (10 marks, Unit 5)

    • Temperature, Hall-effect and piezoelectric sensors
    • Resolution and sensitivity of digital meters
    • Digital voltmeter and frequency meter
    • Power quality analyser
    • Digital storage oscilloscope
    • Data acquisition systems

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.