SPPU SE Electrical syllabus

SPPU · Second Year Electrical Engineering · 2024 Pattern (Revised)

Electrical Machines I

PCC-251-ELE · Semester IV · 3 credits · CCE 40 + end-semester 60

  1. Unit 1: Single-phase Transformers (Part A)

    8 hours

    The ideal transformer; useful and leakage flux; winding resistance, leakage reactance and impedance and their effect on regulation and efficiency; exact and approximate equivalent circuits referred to either side; no-load and on-load phasor diagrams; efficiency, maximum efficiency and all-day efficiency; autotransformers.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Ideal transformer
    • Leakage flux and leakage reactance
    • Equivalent circuit of a transformer
    • Phasor diagrams of a transformer
    • Efficiency and all-day efficiency
    • Autotransformers
  2. Unit 2: Single-phase and Three-phase Transformers (Part B)

    8 hours

    Polarity test; parallel operation of single-phase transformers and load sharing; standard three-phase connections, phasor diagrams and vector groups; parallel operation of three-phase transformers; Scott and V–V connections; three-winding transformers.

    Marks: 12 in the end-semester exam · CCE: Unit test (15 marks, Units 1 & 2)

    • Polarity test
    • Parallel operation and load sharing
    • Three-phase transformer connections
    • Vector groups
    • Scott and V-V connections
    • Three-winding transformers
  3. Unit 3: DC Machines

    8 hours

    Types of DC motors, back EMF and the torque equation; losses, power flow and efficiency; starters; characteristics and speed control of shunt and series motors; armature reaction, compensating windings, commutation, reactance voltage and interpoles.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Back EMF and torque equation of DC motors
    • Losses and efficiency of DC machines
    • DC motor starters
    • Characteristics of DC shunt and series motors
    • Speed control of DC motors
    • Armature reaction and commutation
  4. Unit 4: Three-phase Induction Motors (Part A)

    8 hours

    Construction and types; rotating magnetic field and slip; rotor EMF, frequency and current; torque equation and torque–slip characteristics; effect of rotor resistance and condition for maximum torque; starting, full-load and maximum torque; losses, power flow and efficiency.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (15 marks, Units 3 & 4)

    • Construction of three-phase induction motors
    • Rotating magnetic field and slip
    • Rotor EMF, frequency and current
    • Torque equation and torque-slip characteristics
    • Condition for maximum torque
    • Power flow in an induction motor
  5. Unit 5: Three-phase Induction Motors (Part B)

    8 hours

    The induction motor as a generalised transformer and its phasor diagram; exact and approximate equivalent circuits; no-load and blocked-rotor tests; the circle diagram; need for and types of starters.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (10 marks, Unit 5)

    • Equivalent circuit of an induction motor
    • No-load and blocked-rotor tests
    • Circle diagram
    • Starters for induction motors

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.