SPPU SE Civil syllabus

SPPU · Second Year Civil Engineering · 2024 Pattern (Revised)

Structural Analysis

PCC-252-CVL · Semester IV · 3 credits · CCE 40 + end-semester 60

  1. Unit 1: Indeterminacy and Redundant Beams

    8 hours

    Classifying structures; static and kinematic indeterminacy; propped cantilevers, fixed and continuous beams up to second-degree indeterminacy by consistent deformation.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Static and kinematic indeterminacy
    • Propped cantilever by consistent deformation
    • Fixed beams
    • Continuous beams by consistent deformation
  2. Unit 2: Redundant Trusses and Approximate Frame Analysis

    8 hours

    Redundant trusses by the unit load method for loads, lack of fit, support sinking and temperature; portal and cantilever methods for two-storey, two-bay frames.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Redundant trusses by the unit load method
    • Lack of fit, support settlement and temperature effects
    • Portal method
    • Cantilever method
  3. Unit 3: Slope-deflection Method

    8 hours

    Slope-deflection and equilibrium equations; beams with and without joint translation and support yielding; non-sway and sway portal frames; SFD and BMD.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Slope-deflection equations
    • Beams by slope deflection
    • Non-sway frames by slope deflection
    • Sway frames by slope deflection
  4. Unit 4: Moment Distribution Method

    8 hours

    Stiffness, carry-over and distribution factors; beams with and without translation and support yielding; non-sway and sway portal frames.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Stiffness, carry-over and distribution factors
    • Beams by moment distribution
    • Non-sway frames by moment distribution
    • Sway frames by moment distribution
  5. Unit 5: Stiffness Method

    8 hours

    Flexibility and stiffness; structure and member approaches; beams and rigid portal frames with up to three unknowns by the structure approach.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (8 marks, Unit 5)

    • Flexibility and stiffness concepts
    • Stiffness method: structure and member approaches
    • Beams by the stiffness method
    • Portal frames by the stiffness method

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.