SPPU SE Civil syllabus

SPPU · Second Year Civil Engineering · 2024 Pattern (Revised)

Mechanics of Structures

PCC-201-CVL · Semester III · 3 credits · CCE 40 + end-semester 60

  1. Unit 1: Simple Stresses and Strains

    8 hours

    Stress–strain diagrams for elastic, plastic and brittle materials; axial stresses; linear, lateral, shear and volumetric strains; elastic constants and their relations; temperature stresses; determinate and indeterminate homogeneous and composite sections under loads and temperature change.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Stress, strain and stress–strain diagrams
    • Elastic constants and their relations
    • Bars of composite sections
    • Statically indeterminate bars
    • Temperature stresses
  2. Unit 2: Shear Force and Bending Moment

    8 hours

    Relation between load intensity, shear force and bending moment; SFD and BMD for determinate beams under point loads, UDL, UVL and couples; points of contraflexure and inflexion.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Shear force and bending moment: concepts and relations
    • SFD and BMD for point loads and UDL
    • SFD and BMD for UVL and couples
    • Points of contraflexure
  3. Unit 3: Bending and Shear Stresses in Beams

    8 hours

    Theory of simple bending and the flexure formula, bending-stress distribution and moment of resistance; complementary shear, the shear-stress formula, its distribution across sections, maximum and average shear stress for circular and rectangular sections.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Theory of simple bending and the flexure formula
    • Bending stress distribution and moment of resistance
    • Shear stress formula
    • Shear stress distribution across sections
  4. Unit 4: Torsion, Principal Stresses and Strains

    8 hours

    Torsion of solid and hollow shafts, determinate and indeterminate, and power transmitted; stresses on an oblique plane; magnitude and orientation of principal stresses; maximum shear stress.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Torsion of circular shafts
    • Statically indeterminate shafts
    • Power transmitted by shafts
    • Stresses on an oblique plane
    • Principal stresses and maximum shear stress
    • Mohr's circle
  5. Unit 5: Columns, Eccentric Loading and Deflection of Beams

    8 hours

    Buckling and Euler's formula, effective lengths, Rankine's formula and safe loads; direct and bending stresses in eccentrically loaded short columns, retaining walls, dams and chimneys; core of section; slope and deflection by Macaulay's method.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (8 marks, Unit 5)

    • Euler's theory of columns and effective length
    • Rankine's formula
    • Direct and bending stresses: eccentric loading
    • Retaining walls, dams and chimneys
    • Core of a section
    • Slope and deflection by Macaulay's method

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.