SPPU SE Civil syllabus

SPPU · Second Year Civil Engineering · 2024 Pattern (Revised)

Fluid Mechanics

PCC-251-CVL · Semester IV · 3 credits · CCE 40 + end-semester 60

  1. Unit 1: Fluid Properties and Fluid Statics

    8 hours

    Density, specific weight and gravity, viscosity and Newton's law, rheology, surface tension, capillarity, vapour pressure and compressibility; Pascal's and the hydrostatic law, absolute, gauge and vacuum pressure, manometers; total pressure and centre of pressure on plane and curved surfaces.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Properties of fluids
    • Viscosity and Newton's law of viscosity
    • Surface tension and capillarity
    • Pressure and its measurement
    • Total pressure and centre of pressure
    • Pressure on curved surfaces
  2. Unit 2: Fluid Kinematics

    8 hours

    Eulerian and Lagrangian descriptions, velocity and acceleration; types of flow, streamlines, path lines and streak lines; 3-D continuity; rotation, velocity potential, stream function and flow nets.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Velocity and acceleration of fluid particles
    • Types of flow and flow lines
    • Continuity equation
    • Velocity potential and stream function
    • Flow nets
  3. Unit 3: Fluid Dynamics

    8 hours

    Euler's equation along a streamline and Bernoulli's equation, its limits and modified form; HGL and TEL; venturimeter, orifice meter, rotameter and Pitot tube.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Euler's equation and Bernoulli's equation
    • Hydraulic gradient and energy lines
    • Venturimeter and orifice meter
    • Pitot tube and rotameter
  4. Unit 4: Flow Through Pipes

    8 hours

    Laminar flow and the Hagen–Poiseuille equation; Hazen–Williams; turbulent flow, Darcy–Weisbach and the Moody diagram; major and minor losses; series, parallel and compound pipes and Dupuit's equation; pipe networks by Hardy Cross.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Laminar flow: Hagen–Poiseuille equation
    • Turbulent flow and Darcy–Weisbach equation
    • Minor losses in pipes
    • Pipes in series and parallel
    • Pipe networks: Hardy Cross method
  5. Unit 5: Open Channel Flow

    8 hours

    Channel types and geometry, velocity distribution and the hydraulic jump; Chezy's and Manning's formulae; most efficient rectangular and trapezoidal sections; specific energy and force, critical depth and flow, Froude number; channel transitions.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (8 marks, Unit 5)

    • Open channel flow and its classification
    • Uniform flow: Chezy's and Manning's formulae
    • Most economical channel sections
    • Specific energy and critical depth
    • Froude number and the hydraulic jump

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.