SPPU SE Civil syllabus

SPPU · Second Year Civil Engineering · 2024 Pattern (Revised)

Building Construction and Materials

PCC-203-CVL · Semester III · 3 credits · CCE 40 + end-semester 60

  1. Unit 1: Introduction to Building Technology

    8 hours

    NBC classification of buildings; load-bearing and framed structures and loads; foundations, masonry walls, framed components (footings, columns, beams, lintels, arches, slabs, precast panels), floors, roofs, doors and windows.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Classification of buildings and loads
    • Load-bearing and framed structures
    • Types of foundations
    • Masonry walls, lintels and arches
    • Floors and roofs
    • Doors and windows
  2. Unit 2: Conventional Materials and Techniques

    8 hours

    Stone, brick, cement, concrete and blocks, tiles, roofing, mortar and plaster, admixtures, timber, steel and aluminium, plumbing, sanitary and electrical materials and finishes; load-bearing, brick, stone, timber, bamboo and mud construction; formwork, scaffolding and site safety.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Stones and bricks
    • Cement, mortar and plaster
    • Timber, steel and aluminium in buildings
    • Finishing materials: paints and claddings
    • Brick and stone masonry
    • Formwork and scaffolding
    • Construction site safety
  3. Unit 3: Modern Construction Techniques

    8 hours

    RCC and concrete-frame construction; prefabrication; steel-frame and modular construction; 3D printing of buildings; dry construction; automation in construction.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • RCC frame construction
    • Prefabricated and modular construction
    • Steel frame construction
    • 3D printing and automation in construction
  4. Unit 4: Green Buildings and Sustainable Materials

    8 hours

    Green buildings and ratings (LEED, GRIHA, IGBC), green roofs, passive solar and bioclimatic design, insulation; bamboo, recycled aggregates, fly-ash bricks, AAC blocks, green and geopolymer concrete, waste materials; energy efficiency and solar policy (RPO, REC, carbon credits).

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Green buildings and rating systems
    • Passive solar and bioclimatic design
    • Eco-friendly building materials
    • Energy-efficient buildings and solar policy
  5. Unit 5: Building Bye-laws and Drawings

    8 hours

    UDCPR: plot sizes, road widths, open spaces, margins, building and control lines, room sizes, built-up and carpet area, FSI and TDR, ventilation, lighting, circulation, sanitation and parking, zoning; principles of planning and architectural design, scales, IS 962 symbols, line plans, plans, elevations and sections.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (8 marks, Unit 5)

    • Building bye-laws and UDCPR
    • Built-up area, carpet area, FSI and TDR
    • Principles of building planning
    • Building drawing: plan, elevation and section

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.