SPPU BE Mechanical syllabus

SPPU · Final Year Mechanical Engineering · 2019 Course

Renewable Energy Technologies

402051B · Elective VI · Semester VIII · 3 credits · In-semester 30 + end-semester 70

One of the Elective VI options.

All notes for this subject
  1. Unit 1: Renewable Energy and Solar Fundamentals

    Energy policy and renewable programmes; India's targets and JNNSM; solar radiation and measurement; solar constant, angles and day length; radiation on tilted surfaces.

    Marks: 15 in the in-semester exam

    • Renewable energy policy in India
    • Solar radiation and its measurement
    • Solar angles
  2. Unit 2: Solar Thermal Systems

    Flat-plate collectors, thermal analysis and testing; evacuated tubes; line and point concentrators and tracking; parabolic trough and dish; central receivers; Fresnel; solar thermal applications.

    Marks: 15 in the in-semester exam

    • Flat plate collectors
    • Evacuated tube collectors
    • Concentrating collectors
  3. Unit 3: Solar Photovoltaic Systems

    First-, second- and third-generation cells; losses; modules, panels and arrays; the cell equation and fill factor; MPPT; balance of system; maintenance; DPRs for rooftop and MW plants.

    Marks: 17–18 in the end-semester exam

    • Types of solar cells
    • Solar cell equation and fill factor
    • Maximum power point tracking
    • Solar PV system design
  4. Unit 4: Wind Energy Systems

    Horizontal- and vertical-axis turbines; aerofoils, lift and drag; power extraction and the Betz limit; power coefficient, thrust and torque; tip speed ratio and solidity; rotor design.

    Marks: 17–18 in the end-semester exam

    • Types of wind turbines
    • Betz limit and power coefficient
    • Tip speed ratio and rotor design
  5. Unit 5: Grid-connected Wind and PV

    Onshore and offshore wind farms; small turbines; siting and spacing; annual energy output; installation and maintenance; grid-connected PV design.

    Marks: 17–18 in the end-semester exam

    • Wind farm design and annual energy output
    • Grid-connected PV systems
  6. Unit 6: Bioenergy Systems

    Biomass types, ultimate and proximate analysis and calorific value; biofuels, biodiesel, biohydrogen and biorefineries; pyrolysis, liquefaction and gasification; producer gas and IGCC; aerobic and anaerobic digestion and biogas.

    Marks: 17–18 in the end-semester exam

    • Biomass characteristics
    • Biofuels
    • Biomass gasification
    • Biogas

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.