SPPU BE Mechanical syllabus

SPPU · Final Year Mechanical Engineering · 2019 Course

Modern Machining Processes

402044C · Elective III · Semester VII · 3 credits · In-semester 30 + end-semester 70

One of the Elective III options.

  1. Unit 1: Mechanical Modern Machining

    Need and classification of modern processes; abrasive jet, abrasive water jet, ultrasonic and water jet machining: principles, parameters, MRR, tool wear, finish, merits and applications.

    Marks: 15 in the in-semester exam

    • Classification of modern machining processes
    • Abrasive jet machining
    • Abrasive water jet machining
    • Ultrasonic machining
  2. Unit 2: Energy-assisted Processes

    Laser beam machining and laser optics; plasma arc machining; electron beam machining; focused ion beam; energy levels, heat-affected zone and economics.

    Marks: 15 in the in-semester exam

    • Laser beam machining
    • Plasma arc machining
    • Electron beam machining
    • Focused ion beam machining
  3. Unit 3: Electrochemical Processes

    ECM principle, equipment, parameters, MRR, surface integrity and electrolytes; electrochemical grinding; electro-stream drilling; photochemical and chemical machining.

    Marks: 17–18 in the end-semester exam

    • Electrochemical machining
    • Electrochemical grinding
    • Chemical and photochemical machining
  4. Unit 4: Electro-thermal Processes

    EDM principle, spark circuits, electrodes and dielectrics, parameters, MRR and HAZ; wire EDM; EDG and EDDG; electrochemical discharge machining.

    Marks: 17–18 in the end-semester exam

    • Electric discharge machining
    • Wire EDM
    • Electrochemical discharge machining
  5. Unit 5: Micro and Precision Manufacturing

    Diamond turning, micro turning, drilling, engraving and milling; micro-EDM; material removal and parameters.

    Marks: 17–18 in the end-semester exam

    • Diamond turn machining
    • Micro turning, drilling and milling
    • Micro EDM
  6. Unit 6: Nano-machining and Nano-finishing

    Micro and nano systems; wet and dry etching, photolithography and LIGA; MEMS; magnetic abrasive, abrasive flow and magnetorheological finishing.

    Marks: 17–18 in the end-semester exam

    • Micro and nano fabrication: etching and LIGA
    • MEMS
    • Magnetic abrasive and abrasive flow finishing
    • Magnetorheological finishing

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.