SPPU BE E&TC syllabus

SPPU · Final Year Electronics & Telecommunication Engineering · 2019 Course

VLSI Design and Technology

404182 · Semester VII · 3 credits · In-semester 30 + end-semester 70

  1. Unit 1: Design with HDL

    7 hours

    Design flow; VHDL constructs, data objects and types; entity and architecture; modelling styles; sequential and concurrent statements; packages, subprograms and attributes; combinational, sequential and FSM models; simulation and synthesis; coding styles, partitioning, pipelining and resource sharing.

    Marks: 15 in the in-semester exam

    • VHDL entity and architecture
    • VHDL data objects and data types
    • Sequential and concurrent statements
    • Packages, subprograms and attributes
    • Simulation and synthesis
    • Efficient coding for synthesis
  2. Unit 2: Digital Design and Issues

    6 hours

    Moore and Mealy machines and their HDL code; FIFOs; metastability; noise margin, fan-out and skew; timing and hazards; clock distribution and jitter; ground bounce; power distribution and optimisation; interconnect parasitics and signal integrity; I/O architecture.

    Marks: 15 in the in-semester exam

    • Moore and Mealy machines in VHDL
    • FIFO design
    • Metastability and synchronisers
    • Clock skew, jitter and distribution
    • Signal integrity and interconnect parasitics
    • Power distribution and ground bounce
  3. Unit 3: PLD Architectures and Applications

    6 hours

    Design flow; CPLD and FPGA architectures, features and applications; clock management; simulation and synthesis tools; FPGA implementation; CPLD versus FPGA.

    Marks: 17–18 in the end-semester exam

    • CPLD architecture
    • FPGA architecture
    • FPGA synthesis and implementation
    • Clock management in FPGAs
  4. Unit 4: Digital CMOS Circuits

    7 hours

    NMOS, PMOS and CMOS; MOSFET parasitics; scaling; channel-length modulation, hot electrons and velocity saturation; the CMOS inverter and sizing; CMOS logic; power dissipation and power-delay product; body effect; rise and fall times; latch-up; transmission gates.

    Marks: 17–18 in the end-semester exam

    • MOSFET second-order effects
    • Technology scaling
    • CMOS inverter characteristics
    • CMOS combinational logic design
    • Power dissipation and power-delay product
    • Latch-up and transmission gates
  5. Unit 5: Application-specific Integrated Circuits

    7 hours

    ASIC design flow; SPICE DC, AC, transient and noise analysis; lambda rules and DRC; layout of cells and NAND/NOR library cells; extraction, ERC and LVS; post-layout simulation; antenna effect, electromigration, crosstalk and punch-through; timing analysis.

    Marks: 17–18 in the end-semester exam

    • ASIC design flow
    • SPICE simulation of CMOS cells
    • Lambda design rules and DRC
    • Stick diagrams and cell layout
    • LVS, ERC and parasitic extraction
    • Antenna effect, electromigration and crosstalk
  6. Unit 6: VLSI Testing and Analysis

    6 hours

    Fault types and fault models; design for testability; path sensitising and test pattern generation; testing sequential circuits; built-in self-test; JTAG, boundary scan and the TAP controller.

    Marks: 17–18 in the end-semester exam

    • Fault models
    • Design for testability
    • Test pattern generation
    • Built-in self-test
    • JTAG boundary scan and TAP controller

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.