SPPU BE E&TC syllabus

SPPU · Final Year Electronics & Telecommunication Engineering · 2019 Course

Radiation and Microwave Theory

404181 · Semester VII · 3 credits · In-semester 30 + end-semester 70

  1. Unit 1: Fundamentals of Radiation and Radiating Elements

    6 hours

    Friis transmission equation; antennas, the radiation mechanism and antenna types; radiation pattern, directivity, gain, efficiency, beamwidth, bandwidth, polarisation, input impedance, effective length and area.

    Marks: 15 in the in-semester exam

    • Friis transmission equation
    • Radiation mechanism and types of antennas
    • Radiation pattern, directivity and gain
    • Beamwidth, bandwidth and polarisation
    • Effective length and effective area
  2. Unit 2: Transmission Lines and Waveguides

    6 hours

    Microwave bands and applications; waveguides versus coaxial cables; rectangular waveguide modes, cut-off frequency and dominant mode; excitation and coupling by probe, loop and slot; re-entrant cavities; striplines.

    Marks: 15 in the in-semester exam

    • Microwave frequency bands and applications
    • Rectangular waveguides and modes
    • Cut-off frequency and dominant mode
    • Waveguide excitation and coupling
    • Cavity resonators
    • Striplines
  3. Unit 3: Passive Microwave Components

    6 hours

    Construction and S-parameter analysis of E-plane, H-plane and magic tees; ferrites and Faraday rotation; isolators, circulators and directional couplers; gyrators, filters, phase shifters and attenuators.

    Marks: 17–18 in the end-semester exam

    • Scattering parameters
    • E-plane, H-plane and magic tees
    • Ferrites and Faraday rotation
    • Isolators and circulators
    • Directional couplers
    • Microwave filters, phase shifters and attenuators
  4. Unit 4: Active Microwave Components

    6 hours

    Limits of conventional tubes; O- and M-type tubes; velocity modulation; two-cavity and reflex klystrons; cylindrical magnetron; helix travelling-wave tube; numericals.

    Marks: 17–18 in the end-semester exam

    • Limitations of conventional tubes at microwaves
    • Velocity modulation and klystrons
    • Cavity magnetron
    • Helix travelling wave tube
  5. Unit 5: Solid-state Microwave Devices

    6 hours

    Microwave transistors and MOSFETs; varactors and parametric amplifiers; PIN, tunnel and Schottky diodes; Gunn diodes; avalanche transit-time devices: IMPATT and TRAPATT.

    Marks: 17–18 in the end-semester exam

    • Microwave transistors
    • Varactor diodes and parametric amplifiers
    • PIN, tunnel and Schottky diodes
    • Gunn diode
    • IMPATT and TRAPATT diodes
  6. Unit 6: Microwave Systems and Measurements

    6 hours

    Terrestrial and satellite microwave links; radar and the radar range equation; microwave heating and diathermy; slotted line, detectors, VSWR and power meters; measuring S-parameters, frequency, power, attenuation, VSWR and impedance; radiation hazards.

    Marks: 17–18 in the end-semester exam

    • Microwave communication systems
    • Radar range equation
    • Industrial and medical microwave applications
    • Microwave measurements: VSWR, power and impedance
    • Microwave radiation hazards

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.