SPPU BE E&TC syllabus

SPPU · Final Year Electronics & Telecommunication Engineering · 2019 Course

Low Power CMOS

404185D · Elective IV · Semester VII · 3 credits · In-semester 30 + end-semester 70

One of the Elective IV options.

  1. Unit 1: Power Dissipation in CMOS

    7 hours

    Sources and physics of power dissipation; long-channel and submicron MOSFETs; GIDL; short-circuit and dynamic dissipation; load capacitance; principles and limits of low-power design.

    Marks: 15 in the in-semester exam

    • Sources of power dissipation in CMOS
    • Short-circuit and dynamic power
    • Leakage mechanisms
    • Limits of low-power design
  2. Unit 2: Power Optimisation Techniques

    8 hours

    Clock gating and reduced-swing clocks; floating nodes and keepers; low-swing and charge-recycling buses; low-power SRAM; voltage scaling, VTCMOS and MTCMOS; pipelining and parallelism; switched-capacitance minimisation.

    Marks: 15 in the in-semester exam

    • Clock gating
    • Low-power buses
    • Low-power SRAM
    • Voltage scaling, VTCMOS and MTCMOS
    • Pipelining and parallel processing for low power
  3. Unit 3: Low-power Circuit Design

    7 hours

    Sizing inverter chains and gates for dynamic and leakage power; transistor network restructuring; self-gating, combinational and double-edge-triggered flip-flops; low-power cell libraries; adjustable thresholds.

    Marks: 17–18 in the end-semester exam

    • Transistor and gate sizing
    • Low-power flip-flops
    • Low-power cell libraries
  4. Unit 4: Power Estimation

    7 hours

    Signal modelling and probability; statistical techniques; glitch power; sensitivity analysis; input vector compaction; domino logic; circuit-level estimation; maximum power estimation.

    Marks: 17–18 in the end-semester exam

    • Signal probability and switching activity
    • Glitch power estimation
    • Statistical power estimation
    • Maximum power estimation
  5. Unit 5: Software Design for Low Power

    7 hours

    Sources of software power; gate, architecture and instruction-level power analysis; minimising memory access; instruction selection and ordering; power management; low-power code generation; co-design.

    Marks: 17–18 in the end-semester exam

    • Instruction-level power analysis
    • Software power optimisation
    • Hardware-software co-design for low power
  6. Unit 6: Hardware Design for Low Power

    6 hours

    Adiabatic switching; battery-aware synthesis; variation-tolerant design; CAD tools for low-power synthesis.

    Marks: 17–18 in the end-semester exam

    • Adiabatic switching circuits
    • Battery-aware and variation-tolerant design

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.