SPPU BE E&TC syllabus

SPPU · Final Year Electronics & Telecommunication Engineering · 2019 Course

Fiber Optic Communication

404190 · Semester VIII · 3 credits · In-semester 30 + end-semester 70

  1. Unit 1: Optical Fibers for Telecommunication

    8 hours

    Optical bands, channel capacity and dB/dBm; the fiber link; total internal reflection, acceptance angle and NA; fiber types and modes, V-number and cut-off wavelength; attenuation, bending, splice and connector losses; intermodal and chromatic dispersion; bit rate–distance product; dispersion-shifted fibers; fibers for 5G.

    Marks: 15 in the in-semester exam

    • Optical fiber communication link
    • Numerical aperture and acceptance angle
    • Modes and V-number
    • Attenuation in optical fibers
    • Dispersion in optical fibers
    • Single-mode and dispersion-shifted fibers
  2. Unit 2: Optical Sources

    7 hours

    Direct and indirect bandgap materials; LEDs: efficiency, power, spectral width, temperature and modulation bandwidth; laser diodes: stimulated emission, population inversion and feedback; analog and digital modulation; LEDs versus lasers.

    Marks: 15 in the in-semester exam

    • Light emitting diodes
    • Laser diodes
    • Modulation of optical sources
    • LED versus laser
  3. Unit 3: Photodetectors

    6 hours

    Detector requirements and materials; PN, PIN and avalanche photodiodes; phototransistors; quantum efficiency, responsivity and response time; thermal, dark-current and quantum noise; receiver sensitivity and BER.

    Marks: 17–18 in the end-semester exam

    • PIN photodiode
    • Avalanche photodiode
    • Quantum efficiency and responsivity
    • Receiver noise and sensitivity
  4. Unit 4: Link Design and WDM

    8 hours

    Point-to-point link design; power and rise-time budgets; RZ and NRZ bit rates; WDM and its components: couplers, isolators, circulators, fiber gratings and OADMs; SOA, EDFA and Raman amplifiers; noise figure, OSNR and ASE.

    Marks: 17–18 in the end-semester exam

    • Optical power budget
    • Rise time budget
    • Wavelength division multiplexing
    • Optical amplifiers: EDFA and SOA
  5. Unit 5: Optical Networks

    7 hours

    Optical network elements and topologies; FDDI, SONET/SDH; FTTx and FTTH; PON and GPON; long-haul, metro, access and submarine networks; fiber in 5G.

    Marks: 17–18 in the end-semester exam

    • SONET and SDH
    • Passive optical networks and FTTH
    • Optical network topologies
  6. Unit 6: Optical Fiber Measurements

    6 hours

    Test equipment: visual fault locators, power meters, OTDR, OSA and BER testers; measuring power, NA, attenuation by cutback and OTDR, bending loss and dispersion; eye diagrams.

    Marks: 17–18 in the end-semester exam

    • OTDR
    • Attenuation measurement by cutback
    • Eye diagram

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.