SPPU BE E&TC syllabus

SPPU · Final Year Electronics & Telecommunication Engineering · 2019 Course

Embedded System Design

404191D · Elective V · Semester VIII · 3 credits · In-semester 30 + end-semester 70

One of the Elective V options.

  1. Unit 1: Introduction to Embedded System Design

    6 hours

    Design technology and challenges; classification and characteristics; choosing a processor; hardware and software architectures: round robin, function-queue scheduling and RTOS; integration; tools and debugging; the design cycle.

    Marks: 15 in the in-semester exam

    • Embedded systems: classification and characteristics
    • Embedded software architectures: round robin, FQS and RTOS
    • Hardware–software co-design and the design life cycle
    • Hardware and JTAG debugging, simulators and emulators
  2. Unit 2: ARM Cortex-M4: STM32F4

    8 hours

    STM32F family and MCU selection; STM32F4 pins, CPU, memory, GPIO, clocks, timers, ADC and DAC; the development board and STM32CubeIDE; driving switches and loads; watchdog and RTC; UART; debugging.

    Marks: 15 in the in-semester exam

    • STM32 and STM32CubeIDE
    • STM32 GPIO, timers and interrupts
    • STM32 ADC and DAC
    • Watchdog timer and RTC
    • UART, SPI and I2C on STM32
  3. Unit 3: GPIO and HAL

    6 hours

    HAL drivers, data structures, API classes and naming; GPIO HAL API; HAL for SPI, I2C and CAN; USB on the STM32F4.

    Marks: 17–18 in the end-semester exam

    • STM32 HAL drivers and APIs
    • CAN and USB on STM32F4
  4. Unit 4: RTOS for STM32F4

    8 hours

    RTOS concepts; FreeRTOS configured with STM32CubeMX; thread management; FreeRTOS with the C library; synchronisation primitives; debugging; ChibiOS and Contiki as alternatives.

    Marks: 17–18 in the end-semester exam

    • RTOS memory management and FreeRTOS
    • FreeRTOS on STM32 with CubeMX
    • Semaphores, mutexes and deadlock
    • ChibiOS and Contiki OS
  5. Unit 5: Embedded Design with STM32

    6 hours

    SPI graphical LCD and touch screen; GUIs with TouchGFX; designs such as PC–STM32 image transfer and PID speed control of a DC motor.

    Marks: 17–18 in the end-semester exam

    • Graphical LCD and touch screen with STM32
    • GUI design with TouchGFX
    • PID speed control of a DC motor with STM32
  6. Unit 6: Embedded Android

    6 hours

    Android platforms and requirements; architecture: Linux kernel and HAL; hardware interfaces; file system layout; AOSP libraries.

    Marks: 17–18 in the end-semester exam

    • Embedded Android architecture
    • Android HAL and AOSP libraries

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.