SPPU BE Electrical syllabus

SPPU · Final Year Electrical Engineering · 2019 Course

Alternate Energy System

403144A · Elective II · Semester VII · 4 credits · In-semester 30 + end-semester 70

One of the Elective II options. It covers the same ground as the third-year Renewable Energy Systems, so it shares those notes.

All notes for this subject
  1. Unit 1: Solar Energy I

    8 hours

    Solar constant and spectrum; extraterrestrial and terrestrial radiation; solar geometry and cos θ; predicting radiation; beam, diffuse and reflected radiation on tilted surfaces; measuring instruments; thermal collection and storage; CSP with troughs, Fresnel reflectors and dishes.

    Marks: 15 in the in-semester exam

    • Solar radiation and solar angles
    • Radiation on tilted surfaces
    • Solar thermal collectors
    • Concentrating solar power
  2. Unit 2: Solar Energy II

    6 hours

    Thin-film, mono- and poly-crystalline cells; modules and arrays; effects of intensity, angle, shading, temperature and climate; tracking; cell characteristics; PV system components and efficiency; MPPT; PV system design.

    Marks: 15 in the in-semester exam

    • Solar cell I-V and P-V characteristics
    • Factors affecting PV array design
    • Maximum power point tracking
    • Solar PV system design
  3. Unit 3: Wind Energy

    8 hours

    Power in the wind and the efficiency limit; rotor design; power–speed and torque–speed curves; pitch, stall, power-electronic and yaw control; wind statistics; site and turbine selection; offshore wind.

    Marks: 17–18 in the end-semester exam

    • Power in the wind and the Betz limit
    • Wind turbine characteristics
    • Wind turbine control
    • Site and turbine selection
    • Offshore wind energy
  4. Unit 4: Biomass Energy

    6 hours

    Biomass resources and conversion; anaerobic digestion and fermentation; gasifiers; biogas plants, floating and fixed dome, and their design; biodiesel; power from MSW, landfill gas and liquid waste.

    Marks: 17–18 in the end-semester exam

    • Biomass resources and conversion
    • Biomass gasification
    • Biogas plants
    • Energy from municipal solid waste
  5. Unit 5: Fuel Cells and Storage

    8 hours

    Fuel cell principles, consumption and characteristics; types; hydrogen production, use and storage; battery cells, classification and parameters; pumped storage, SMES and compressed air.

    Marks: 17–18 in the end-semester exam

    • Fuel cells
    • Hydrogen production and storage
    • Battery parameters and types
    • Pumped, SMES and compressed air storage
  6. Unit 6: Integration and Economics

    6 hours

    Grid integration and grid codes; simple and internal rate of return, NPV, life-cycle costing, fuel escalation and levelised cost.

    Marks: 17–18 in the end-semester exam

    • Grid integration of renewable energy
    • Economics of renewable energy
    • Levelised cost of energy

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.