SPPU · Final Year Electrical Engineering · 2019 Course
Power System Operation and Control
403141 · Semester VII · 4 credits · In-semester 30 + end-semester 70
Unit 1: Power System Stability (Angle Control)
8 hoursSynchronous machine dynamics and the swing equation; power-angle curve; steady-state, transient and dynamic stability; equal area criterion for a sudden change of input, fault clearing, critical clearing angle and reclosure; improving stability.
Marks: 15 in the in-semester exam
- Swing equation
- Power angle curve
- Steady state, transient and dynamic stability
- Equal area criterion
- Critical clearing angle
- Methods to improve stability
Unit 2: Reactive Power Control
8 hoursNeed for reactive power control; production and absorption of reactive power; generator capability curve; series compensation, TCSC and SSSC; shunt compensation, STATCOM and FC-TCR; UPFC.
Marks: 15 in the in-semester exam
- Production and absorption of reactive power
- Generator capability curve
- Series compensation: TCSC and SSSC
- Shunt compensation: STATCOM and FC-TCR
- Unified power flow controller
Unit 3: Automatic Generation Control
8 hoursLoad-frequency control of an isolated system; steady-state and dynamic response; control areas; two-area load-frequency control; automatic voltage regulator.
Marks: 17–18 in the end-semester exam
- Load frequency control of an isolated system
- Steady state and dynamic response of LFC
- Two-area load frequency control
- Automatic voltage regulator
Unit 4: Economic Load Dispatch and Unit Commitment
8 hoursCost and incremental cost curves; Lagrange multiplier method; penalty factors; dispatch with losses using B-coefficients; unit commitment constraints and spinning reserve; priority list and dynamic programming methods.
Marks: 17–18 in the end-semester exam
- Incremental cost curves
- Economic dispatch by Lagrange multipliers
- Penalty factor and B-coefficients
- Unit commitment constraints
- Unit commitment by priority list and dynamic programming
Unit 5: Energy Control
6 hoursPower interchange between utilities; economy interchange evaluation; capacity and diversity interchange; energy banking; emergency and inadvertent interchange; power pools.
Marks: 17–18 in the end-semester exam
- Interchange of power between utilities
- Types of interchange and energy banking
- Power pools
Unit 6: Voltage Stability
7 hoursPV and QV curves; generator and load characteristics; voltage collapse; classification of voltage stability; static and dynamic analysis; voltage stability indices.
Marks: 17–18 in the end-semester exam
- PV and QV curves
- Voltage collapse
- Voltage stability analysis and indices
Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.