SPPU · Final Year Electrical Engineering · 2019 Course
PLC and SCADA
403143A · Elective I · Semester VII · 4 credits · In-semester 30 + end-semester 70
One of the Elective I options.
Unit 1: Introduction to PLC
7 hoursAutomation and the need for PLCs; history and NEMA definition; fixed and modular PLCs; I/O modules, CPU, programmers and power supplies; selection and specifications; comparing major brands.
Marks: 15 in the in-semester exam
- PLC definition and evolution
- PLC hardware: CPU and I/O modules
- PLC selection
Unit 2: Interfacing PLC with I/O Devices
8 hoursDigital and analog input and output devices; temperature, pressure, flow and level sensors; electrical, pneumatic and hydraulic actuators; encoders; limit and proximity switches; control valves.
Marks: 15 in the in-semester exam
- Digital input devices
- Analog input devices
- Output devices and drives
- Actuators
- Encoders and proximity sensors
Unit 3: PLC Programming
8 hoursPLC languages; ladder diagram rules; timers and counters; reset and latch; MCR and control zones; ladder logic for motor sequencing, tank level, temperature, lifts, bottle filling, parking and traffic lights.
Marks: 17–18 in the end-semester exam
- Ladder diagram programming
- Timers and counters
- Latch, unlatch and master control relay
- Ladder logic applications
Unit 4: Advanced Functions and Applications
8 hoursAnalog PLC operation; PID control, modules and tuning; AC motor starters and overload protection; DC motor control; VFDs; tank level, RTD temperature and motor speed control.
Marks: 17–18 in the end-semester exam
- Analog and PID operations in PLCs
- PID tuning
- Motor control with PLCs
Unit 5: SCADA Systems
7 hoursSCADA history and architecture; HMI, MTU and RTU; communication; generations of SCADA; SCADA in power systems, substation automation and EMS; SCADA in refineries, generation, water and chemical plants.
Marks: 17–18 in the end-semester exam
- SCADA architecture: HMI, MTU and RTU
- Generations of SCADA
- SCADA in power systems
- SCADA in critical infrastructure
Unit 6: SCADA Protocols and DCS
7 hoursOSI and TCP/IP; Modbus, DNP3, IEC 60870-5-101, CIP, EtherNet/IP and Profibus; DCS architecture and features; DCS versus PLC.
Marks: 17–18 in the end-semester exam
- OSI and TCP/IP models
- Modbus and DNP3
- Profibus and industrial Ethernet
- Distributed control systems
Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.