SPPU BE Electrical syllabus

SPPU · Final Year Electrical Engineering · 2019 Course

EHV AC Transmission

403151A · Elective IV · Semester VIII · 3 credits · In-semester 30 + end-semester 70

One of the Elective IV options.

  1. Unit 1: EHV AC Transmission

    7 hours

    Need for EHV; power capacity and losses; mechanical considerations and vibration; travelling waves, reflection and attenuation.

    Marks: 15 in the in-semester exam

    • Need for EHV transmission
    • Travelling waves on lines
    • Reflection and transmission coefficients
  2. Unit 2: Line and Ground Parameters

    7 hours

    Conductor resistance and temperature rise; current capacity; bundled conductors; inductance and capacitance of EHV configurations.

    Marks: 15 in the in-semester exam

    • Bundled conductors
    • Inductance of EHV lines
    • Capacitance of EHV lines
  3. Unit 3: Voltage Gradients of Conductors

    7 hours

    Fields of point, sphere and line charges; charge–potential relations for multi-conductor lines; surface voltage gradients on single and bundled conductors; Mangoldt formula; cage design for corona.

    Marks: 17–18 in the end-semester exam

    • Charge-potential relations
    • Surface voltage gradient on conductors
    • Mangoldt formula
  4. Unit 4: Electrostatic and Magnetic Fields

    7 hours

    Shock currents; effects of fields on people, animals and plants; ground-level field profiles; induction on unenergised circuits and ground wires; magnetic fields and health.

    Marks: 17–18 in the end-semester exam

    • Electrostatic field of EHV lines
    • Electrostatic induction
    • Magnetic field effects
  5. Unit 5: Corona and its Effects

    7 hours

    Corona inception and visual corona voltages; critical fields; corona loss and its formulae; corona current and charge–voltage diagrams; audible noise and its measurement.

    Marks: 17–18 in the end-semester exam

    • Corona inception voltage
    • Corona loss
    • Audible noise
  6. Unit 6: Line Design and EHV Cables

    7 hours

    Designing EHV lines for steady-state limits and transient overvoltages; insulation design; EHV cable types, characteristics and insulation.

    Marks: 17–18 in the end-semester exam

    • Design of EHV lines
    • Insulation design for EHV lines
    • EHV cables

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.