SPPU · Final Year Civil Engineering · 2019 Pattern
Irrigation and Drainage
401013C · Elective V · Semester VIII · 3 credits · In-semester 30 + end-semester 70
One of the Elective V options.
Unit 1: Introduction to Irrigation
6 hoursNeed, benefits and ill effects of irrigation; crop patterns and efficiencies; distribution systems; surface, subsurface and micro irrigation; quality of irrigation water; deficit irrigation; AI in irrigation.
Marks: 15 in the in-semester exam
- Irrigation efficiencies and cropping intensity
- Methods of irrigation
- Quality of irrigation water
Unit 2: Soil Moisture and Evapotranspiration
6 hoursSoil texture and structure; field capacity, wilting point and MAD; soil moisture tension and measurement; lysimeters; Penman, FAO Penman–Monteith, Blaney–Criddle and Thornthwaite methods; crop water requirement and design discharge.
Marks: 15 in the in-semester exam
- Soil-water relationships
- Measurement of soil moisture
- Evapotranspiration estimation
- Crop water requirement
Unit 3: Lift and Drip Irrigation
6 hoursCentrifugal pumps, NPSH, power and characteristics; lift irrigation schemes: intake, jack well and rising main; drip irrigation, wetting patterns, components, design and maintenance.
Marks: 17–18 in the end-semester exam
- Centrifugal pumps for irrigation
- Lift irrigation schemes
- Design of drip irrigation systems
Unit 4: Sprinkler Irrigation
6 hoursTypes and components of sprinkler systems; distribution patterns and uniformity coefficient; layout, sprinkler spacing, pump capacity and hydraulic design; cost, operation and maintenance.
Marks: 17–18 in the end-semester exam
- Sprinkler systems and components
- Uniformity coefficient
- Design of sprinkler systems
Unit 5: Salt-affected Soils
6 hoursSalinity, EC and pH; SAR and ESP; saline and alkaline soils; salinity and water stress and yield reduction; salt balance; leaching requirement; gypsum requirement.
Marks: 17–18 in the end-semester exam
- Salinity and sodicity of soils
- Leaching requirement
- Reclamation of alkali soils
Unit 6: Drainage of Irrigated Land
6 hoursWaterlogging; surface, subsurface and vertical drainage; land grading and field drains; subsurface drain layouts, envelopes and structures; drainage coefficient; drain spacing by Hooghoudt and Glover–Dumm; drain pipe size and materials.
Marks: 17–18 in the end-semester exam
- Waterlogging
- Surface drainage
- Subsurface drainage systems
- Drain spacing equations
Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.